Do all Fifth Wheel Rails have the Same Dimensions

Question

Question:

Are all 5th wheel rail mounts universal.

asked by: Parker D

0

Expert Reply:

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though.

If you measure 22 inches on center between the two rails and they look like the rails of the # RP30035 that you referenced they would be the industry standard.

These rails can fit hitch brands Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky.

expert reply by: Jameson C

0

click to enlarge

Mark

8/8/2020

will the rails and hard ware from a 2012 ram fit a 20q6 toyota tundar

Reply

Jon G.

8/19/2020

It kind of depends on what brand you have for your Ram and what exact kit, but the rails from a 2012 Ram pickup can possibly be used for a 2016 Toyota Tundra - you just need to confirm what you have on your Ram and then make sure you get the correct mounting brackets for your Tundra. For example, the Rails # RP58058 are universal and fit the vast majority of trucks on the market, but the mounting brackets needed for the install can vary. For your '16 Tundra you'd need # RP50084.

Reply

Answer 1

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

view full answer...

Answer 2

The Under-Bed Rail and Installation Kit #RP87FR has a powder coated finish that will resist rust and corrosion with the aluminum bed on a 2019 Ford Super Duty. For the installation you will need to cut some holes in the bed though so to keep that…

view full answer...

Answer 3

The Reese Elite Series under bed puck system, part #RP87FR is compatible with your 2017 Ford F250. The puck spacing is identical to hat of the Ford OEM system, so you'd be able to use any puck mounted hitch designed for the Ford OEM tow/prep…

view full answer...

Answer 4

The MORryde StepAbove RV Step part #MR65RR is the same as the STP-210 which is the newest generation. It is designed for a 31-1/2" - 37-1/2" entry height and 27-3/4" - 28-1/4" doorway width. It's a strut assisted model. If you…

view full answer...

Answer 5

Since you have a 4' breakaway cable any 4' coiled cable can be used. You can use the Fastway #FA80-01-2204, which will come with the plunger as well or the Fastway #FA80-01-2140 if you're plunger is still is good shape, you'll just…

view full answer...

Answer 6

Hey Joe thanks for the information! The PullRite ISR Series SuperLite 5th Wheel Hitch item #PUL53RR does not require a gooseneck ball because it attaches to industry standard base rails. Since your Ram truck has the puck system you would need the…

view full answer...

Answer 7

So from what I can gather it sounds like you're looking for a B&W Companion that is compatible with ISR, in which there isn't one unfortunately. The B&W Companion is designed to be used with either a factory puck system like…

view full answer...

Answer 8

In regards to the Curt Custom Fifth Wheel Installation Kit part #C16400-204 which is a fit for a 2017 GMC Sierra 1500, the distance from the edge of the truck bed to the edge of the forward-most rail is 47-1/2" on both the 5-1/2' and…

view full answer...

Answer 9

For a short-bed truck such as your 2017 Ford F-250 Super Duty that has the factory 5th wheel; prep package the B&W Companion hitch you need to use is the slider version, part #BWRVK3370. But in the event that your 5th wheel trailer has a pivoting…

view full answer...

Answer 10

When setting up your B&W Companion 5th Wheel Trailer Hitch w/ Slider part #BWRVK3400-5W in your Ford F-250 I like to start with them forward as far as possible. It helps with the weight transfer back to the front of the truck. While minimal it…

view full answer...

Answer 11

I do have a few options for you to add an underbed kit on your 2013 Chevy Silverado 2500 6-1/2' bed and the real differential is the style you are looking for. For a true 4-point puck system you need the Elite Series Under-Bed Gooseneck Hitch…

view full answer...

Answer 12

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...