bing tracking image
Q & A Icon

etrailer Electric Trailer Jack Interfering with Tailgate  

Updated 09/28/2026 | Published 09/20/2026

Question:

I have a 2021 Ford F250 and recently bought e23ZV. My tailgate does not open all the way due to the power head of the jack. Can the power head be rotated 90 degrees? The holes on the trailer do not line up if I rotate the entire jack. If I can rotate the power head, how can the be done?

0

Expert Reply:

Hey Eric. Unfortunately, there isn't an approved way to rotate just the power head of the jack. I have seen comments from customers who have modified or repositioned the head to address clearance issues, but this isn't something we've tested, and we don't have instructions for doing this. Because of that, I wouldn't recommend modifying the jack itself.

I'm not sure how much additional clearance you need for your tailgate, but before modifying the jack, I'd consider using a longer ball mount. Something like the Brophy Ball Mount for 2" Hitches # BH20 will move the trailer farther away from the truck, which may provide enough additional clearance for the tailgate to open without contacting the jack head. Keep in mind that you'll still want the ball mount to provide the correct rise or drop so the trailer remains level when towing.

What size receiver do you have on your F-250, and how much does your trailer weigh?

expert reply by:
0
Christopher H
Darren N. profile picture

Darren N.

9/25/2026

Yes, I agree that an extended hitch is about the only thing that will fix that unless you drill out the mounting holes to get them to fit to your trailer tongue, but you still will have the powerhead offset at about 100° and it still doesn’t provide enough clearance. I was thinking of taking the power head off and spinning around the shaft myself I just haven’t gotten to it yet. Other than that, the powerhead works great on a 7 x 14 when it’s fully loaded and I run it off a small little 12 V battery that runs the electric brakes. I did wire it directly into the battery, which also is connected to the trailer plug which if I plug it into the truck and the battery is dead I can still run the jack. Good luck.

Christopher H. profile picture
Etrailer Expert

Christopher H.

9/28/2026

@DarrenN Thanks for the feedback here! As you mentioned above, I'm sure there is a way to do it and I'm sure it's been done but there are other options.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>