bing tracking image
Q & A Icon

Looking for Rear Stabilizer Jack to Fit 2 inch by 2 inch Square Receptacle at Rear of Trailer  

Updated 09/14/2026 | Published 09/13/2026

Question:

I’m looking for rear stabilizer jacks for an 16’, 14k lb iron horse dump trailer about 5000 pounds empty weight. Just looking for the jacks to keep the trailer tongue from popping up if I load heavy equipment like a tractor into it. The receptacles in the back are just over a 2 in square and it has a 1/2 inch hole drilled through it. At trailer level, it sits just about 27 inches high. I would appreciate some help finding the right part for this trailer.

0

Expert Reply:

Hey Carl, welcome back! It sounds like what you are looking for is the Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-FT. This is 2 inch by 2 inch and we've had several customers of ours use this in exact way you described so it will work great for you.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>