What Adapter Will Allow Pullrite 2900 To Fit OEM Pucks of 2020 Ram 2500

Question

Question:

Does this work with the Pullrite 2900 Superglide? I have a 2020 Ram 2500 with the puck system. Have the 2900 hitch and want to use in my puck system.PUL46GR

asked by: Robin S

0

Expert Reply:

Hey Robin, for your Pullrite 2900 Superglide you will need an adapter like the part # C29BR instead of the # PUL46GR as this adapter does not work on your truck.

expert reply by: Jameson C

0

Demco Adapter
(click to enlarge)

Answer 1

Hey Fransicso. You'll want to use the Adapter Rails for Curt 5th Wheel Hitch - Dodge Ram Towing Prep Package #C29BR to convert your 2700 series PullRite to fit your Ram's prep package. The adapter you were looking at #PUL46GR is specifically…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

What Adapter Will Allow Pullrite 2900 To Fit OEM Pucks of 2020 Ram 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching