bing tracking image
Q & A Icon

Availability of Female 6-Way Tester for Roadmaster Wiring  

Updated 09/14/2026 | Published 09/06/2026

Question:

I purchased a Roadmaster Nighthawk All-Terrain Tow Bar in 2020. Its worked great. But recently its stating to act up. I bought a backup cable to protect us while traveling. The main reason I bought this system is because the cable is integrated into the bar. Im going to purchase a new 6 point plug to replace the old one go to the toad. This is my question, why cant a find a male 6 point tester? It would make checking my plug so much easier.

0

Expert Reply:

Hey Phil! This is a pretty uncommon testing situation, and the demand just isn't there to make a female 6-way tester for flat tow wiring. To check the wiring running through the Nighthawk # RM-676, your best option is to plug the 7-way into the motorhome and use a circuit tester on the pins at the 6-way end while you run through the different light functions.

If you find the cord itself is the problem, the Replacement Power Cord # RM-1676-7R is designed for the older Nighthawk with amber LEDs and includes the wiring that powers the lights on the tow bar. If yours has red and amber LEDs, you will need # RM36NQ instead.

Where are you headed next with your motorhome once you sort out the wiring?

expert reply by:
0
Robin H
Replacement Nighthawk Cable
Replacement Nighthawk Cable
(click to enlarge)
Phil P. profile picture

Phil P.

9/10/2026

I may do that. We've been living full time for 6 years. In fact this will be our 7th season heading to Texas. I just recently switched vehicles and the 6 pin was fussy. I've got it working so I may just replace it this winter.

Robin H. profile picture
Etrailer Expert

Robin H.

9/11/2026

@PhilP sounds like a good plan. Since you're living in the motorhome full time, having a circuit tester on hand would be a good idea anyway for troubleshooting little electrical issues along the way. If you've got the 6-way working for now, replacing it this winter should have you ready for season 7 in Texas!
Anthony P. profile picture

Anthony P.

9/11/2026

I purchased the wire replacement kit for our night hawk. It was a fairly easy exchange. I would go an extra step and make sure the wire connections are tight at both plugs. I started having issues with one blinker light on the toad and found loose wires in the plug on the front of the toad. Good luck.

Robin H. profile picture
Etrailer Expert

Robin H.

9/11/2026

@AnthonyP that's a good tip. A loose connection at either plug can definitely cause some frustrating intermittent lighting issues, so they're worth checking before replacing anything.
Dick F. profile picture

Dick F.

9/11/2026

Having a good multi-meter to test continuity through your entire power cable is indispensable for this job as well as many other circuit problems in your rig. 6-ways are notorious for poor connections into stranded wire such as comes on the Roadmaster cable.

Robin H. profile picture
Etrailer Expert

Robin H.

9/14/2026

@DickF good point, a multimeter is definitely handy for tracking down a problem like this. Thanks for adding that!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>