bing tracking image
Q & A Icon

Recommended Stop Light Switch Kit for a 2026 Jeep Wrangler Rubicon  

Updated 11/03/2026 | Published 08/31/2026

Question:

Do I need a brakelight switch or a Brake relay on a 2026 Jeep Runicon 3.6 liter with LED Lights?

0

Expert Reply:

No, you will not Robert, however you will need the Stop Light Switch Kit item # RM-751490 if you're going to be using a permanently installed supplemental braking system like the Curt RVibrake Shadow 2 item # RVI94FR you were looking at.

The Stop Light Switch Kit item # RM-751490 is going to make sure the tail lights are activating when the supplemental braking system is applying the brakes. It mounts to your Jeep's brake pedal arm and detects when the pedal moves. The Bullseye monitor included with the Curt RVibrake Shadow 2 item # RVI94FR lets you know the system is activating the brakes correctly.

Here are the rest of the parts I recommend using to flat tow your 2026 Jeep Wrangler Rubicon:

Tow Bar and Safety Cables - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plate item # e84ZR

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5 - stock bumper

Wiring Harness - Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord item # RM63MR

I linked a few installation videos below so you can see how to get these parts set up on your Jeep.

What kind of motorhome do you have and how far off of the ground is the hitch receiver on it? You may need a high low adapter because the tow bar and the baseplate have to be within 3" of each over to avoid putting stress on the tow bar arms? If you could add this information where it says, Add Comment, I can see if you need a high low adapter. Feel free to throw in any additional questions you have as well.

expert reply by:
0
Jerred H
RM-521453-5
RM-521453-5
(click to enlarge)
Robert profile picture

Robert

9/1/2026

Thank You How does the Brake light switch communicate to the Bullseye?

Jerred H. profile picture
Etrailer Expert

Jerred H.

9/2/2026

@Robert It doesn't communicate directly with the Bullseye I should've phrased that better. When the Curt RVibrake Shadow 2 item # RVI94FR senses your motorhome slowing or stopping it pulls your Jeep's brake pedal to activate the brakes. The stop light switch is designed to register the brake pedal's movement and activate your Jeep's tail lights. The factory brake lights on a 2026 Jeep Wrangler Rubicon generally will not operate when the brake pedal is moved while it is in flat-tow mode. Which is why the Stop Light Switch Kit item # RM-751490 is recommended.
Bill D. profile picture

Bill D.

9/2/2026

I put one in my 2019 Wrangler and the light on the dash in the RV is very handy because you can definitely tell and be assured that the brake pedal is being depressed and it definitely gives you a sense of security knowing that that part of the system is functioning correctly. Installing the switch on the brake pedal is a pain in the neck, but can be done and it is very sensitive to the adjustment.

Jerred H. profile picture
Etrailer Expert

Jerred H.

9/2/2026

@BillD Thanks for that feedback Bill! I really appreciate you taking the time to come back and share that with us.
John R. profile picture

John R.

9/2/2026

I did the same as Bill D. I installed this switch on my 2026 Wrangler. Even though my brake system has an in-cab indicator when it is activated, I want confirmation of when the Jeep brake pedal was actually being pushed. Installation was a little challenging but not terrible.

Jerred H. profile picture
Etrailer Expert

Jerred H.

9/2/2026

@JohnR Thanks for coming back and sharing that feedback John! That peace of mind really helps when you're driving down the road.
Robert W. profile picture

Robert W.

11/2/2026

Great product, tricky getting access under dash. Very satisfied.

Jerred H. profile picture
Etrailer Expert

Jerred H.

11/3/2026

@RobertW Thanks for sharing that feedback Robert. I appreciate you taking the time.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>