bing tracking image
Q & A Icon

Keyed Alike Hitch Pin That Measures 1/2" x 2-13/16"  

Updated 09/03/2026 | Published 08/29/2026

Question:

How can I get three key to like Kurt c23517 trailer hitch locks? I need specifically half inch diameter and at least around 2 13/16 clearance between the lock and stop so those seem to be perfect but I dont want three different keys. Is that possible?

0

Expert Reply:

Hi Earl!

The Curt Trailer Hitch Receiver Lock - 1-1/4" and 2" Hitches - Stainless Steel # C23517 is going to the best option we have available for you, but unfortunately, it cannot be keyed alike. Curt does not advertise their key numbers on their packaging like some other manufacturers do. There is technically a chance you will get the same key number, but it's pretty unlikely if I'm being honest.

I went through all the options we have for 1/2" pins, but none of the keyed alike option we have are nearly as long as the one you are needing. The only other pin we have that could potentially work is the RV Designer 1/2" Hitch Pin with 3" Usable Span for 1-1/4" and 2" Receivers # RD83GR. This isn't a locking pin though, but you could use something like the InfiniteRule Trailer Tongue Latch Lock # IR87RR in place of the clip. However, this has a 1/4" pin and you would need to drill out the clip hole on the end of the # RD83GR to make them fit. Not the greatest option in the world, but it is an option.

What are you wanting to lock with these? It's a fairly odd size you are looking for.

expert reply by:
0
Lazer S
John R. profile picture

John R.

9/3/2026

The lock Works great. As far as 3 keys I don’t know. Just got the 2 that came with it.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>