Availability Of 2" Trailer Hitch Receiver For 1989 Geo Tracker

Question

Question:

Do you make a hitch with a 2 receiver that fits a 1989 Geo Tracker?

asked by: Keith B

0

Expert Reply:

Hey Keith, thanks for reaching out. At this time there is only one custom fit front hitch made for the 1989 Geo Tracker, the Curt # 11128. This has a 1-1/4" receiver though. There is nothing made for that vehicle with a 2" receiver.

What were you wanting to use the hitch for?

expert reply by: Jesse M

0

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(click to enlarge)

Keith B.

9/1/2026

It is my tow vehicle and I need it so we can put a bike rack on the back for our e bikes.

Jesse M.

9/2/2026

@KeithB Ok gotcha. Yea a 1989 Geo Tracker isn't exactly an ideal candidate for carrying e-bikes since there isn't a 2" hitch made for it. You can still carry heavy bikes, but you'll need a rack made for a 1-1/4" hitch that can handle the weight. The Thule EasyFold XT Bike Rack # TH903202 is a good option for that. It will fit the 1-1/4" hitch and it can hold two bikes weighing up to 65 lbs apiece. What kind of bikes do you have?

Keith

9/2/2026

I already have a 2" heavy duty bike rack for our two 90 pounds each Cybervelo electric bikes. I have a double receiver that I use now with an extension for the Tracker, and was trying to shorten things up. I will just plan on sticking with my current set up for now. Thanks for you help!

Jesse M.

9/2/2026

@Keith Ok gotcha. Glad to help! You know where to find me if you ever need anything else!

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey David, your RockyMounts MonoRail 2 bike rack #RKY10004 will fit and work great in the Curt hitch part #C94WR. When this hitch is installed there will be 3-1/4 inches from the center of it's hitch pin hole out to the furthest point on the rear…

view full answer...

Answer 5

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 6

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 7

Hi Gary! We have exactly what you are looking for with the Curt T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector #C28DQ. This is a plug and play harness, with one wire that does need to be run up to the battery for power, and the…

view full answer...

Answer 8

Hey Steve, this is a really great question. So the Curt #C94WR and the etrailer part #e38KR are very similar. Only real difference is the finish. The etrailer has a matte finish and the Curt has a gloss finish. Aside from that it's exact same…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 11

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 12

Appreciate you reaching out Tom, happy to help! Curt Hitch #C34FR62ZY does allow the hands free liftgate sensor on the 2026 Toyota RAV4 PHEV to work properly once it's installed. It may take a few times to find the sweet spot, so you'll move…

view full answer...

Availability Of 2" Trailer Hitch Receiver For 1989 Geo Tracker

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching