Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
This item does not fit your vehicle
2004 Dodge Sprinter
These items fit your vehicle
2004 Dodge Sprinter
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling through vehicle frame required for installation
California residents: click here
This should have been a simple four bolt install, but due to a flaw in design it took me two hours to install it. First off the hitch should be about 1/2 inch wider than it is. The mounting holes are elongated to allow some wiggle room but i could only get one mounting bolt to thread. After much effort and aggravation i realized the diameter of the flat washer was too big and pushing agaisnt the hitch preventing the hole on the other side to line up. I ground the washer to create a flat side, removed about 1/4 in, and was able to get the two bolts closest to rear of vehicle to thread up but the bolt was firmly against the outside of the elongated hole the two bolts towards the front of vehicle would not thread in because the hitch covered part of the bolt hole. I had to remove the two bolts i had installed and place the hitch in my vice. Using a 3 lb hammer i bent the frame bracket about 1/4 inch out on both sides. After this modification i was able to attach the hitch to the vehicle without any other issues.
The hitch looks nice on the vehicle and should serve me well.
Great fit and looks well made.
Glenn H.
10/7/2025
One year later and the hitch is still holding up great. Have been to Big Bend NP back country and several trails around home with a hitch carrier hanging off the back.
Once I finally got it in I'm satisfied with the hitch. It's made very sturdy. Works well. But the installation was extremely difficult. It was such a tight fit I had to use a sledgehammer to hammer it in place. Threading the bolts through wasn't very easy it took some doing.
It is a lightweight hitch, and it has worked perfectly even on medium sized hauling. Once the old hitch was removed, installation was very easy. I was able to do it myself with no help in about an hour. There is some peeling paint and rust starting, but I've never had a hitch that hasn't had that.
Guy
5/19/2022
This hitch is working perfectly after a year. It is on a car that is only used sparingly, and kept in a garage, and shows very little wear or corrosion.
The trailer hitch was exactly as they said plus it was priced right.
Brittany is super on the phone and great at returning calls.
You can't go wrong with etrailer.
Darrell C.
4/7/2018
As before, just perfect.
Super quick delivery. The hitch bolted right up. There is a plug and play connector that would be more appropriate for my Tacker other than an oprn wire harness. hoping to track that one down soon.
Jenny N.
1/10/2022
I checked with all the aftermarket manufactures that we offer and there are only hardwire options for the 1995 Geo Tracker.
Everything looks great but the bolts are the wrong size , won’t fit my vehicle. Will go to hardware store to get bolts
Hitch arrived on time in good shape. Very easy to mount on my 96 tracker,had it installed in less than 30 mins. Only drawback is I wanted a 2 inch reciever,but apparently no one make that for the Tracker so will have to use adapter. Very good quality and fit.
Arrived promptly. Excellent craftsmanship, well made. Liked that it was made in the USA.
Yakima bike rack fits perfectly with good clearance from spare tire. Needed to change out two bolts with smaller heads due to provided bolt heads did not clear fender apperatus. Love this receiver hitch.
Excellent quality. Bolts right up. The only installation issue is the provided bolts are too long to use on the rear most two holes without removing the bumper support brackets (1989 Suzuki Sidekick). The included bolts are purposely long to allow for a range of applications, but shorter bolts would have made it easier. Minor whining over!
The hitch was as described & easy to install. I'm very happy with purchase. Thank you VCD South Jersey Shore
Smooth installation. Nice hitch.
Jim
10/27/2023
This hitch has been problem free. I have towed a utility trailer with it around town to retrieve building supplies and other purchases.
The hitch bolted up to my car very easy, no problems. It also gives me extra protection for my gas tank. And now I am able to hook up to my trailer and hall anything I want when needed.
I was surprised how fast i got my order . Catherine helped me make sure i had the right part , it fit perfict and was easy to install just like she said . I will forsure tell my friends about etrailer and service / & quality of product . Thank Rick PS You guys made my day !
Great product and fit like a glove! And the help from Etrailer Tech Support was solid.
Shipping was fast and products arrived with no problems. Everything fit and was as advertised.
The hitch fit perfect on our Geo Tracker great product and fast delivery
Perfect fit, great support even though i didn't need any. Etrailer always exceeds expectations
The hitch has worked out perfectly and was very easy to install.
The hitch was a perfect fit and easy to install.
Mounting ends of hitch should be wrapped in cardboard so they don't cut through the box in shipment (nice heavy duty box though).
Washers are too big and bolt heads at rear need to be 14mm or Socket head to clear frame with a socket attached.
The hitch lined up perfectly (just the issue with mounting hardware).
Katrina B.
8/12/2022
I apologize that you were having complications with the hardware. I have sent your information over to our customer service department for them to better assist you.
Excellent product, it was simple to attach to My sidekick! All parts was there and instructions easy to follow!
I ordered these two, front and rear for a 1990 GEO Tracker 4 wheel drive that I am rebuilding. I believed they would fit, I finally got around to mounting them and they don't fit, to large. I think I have had them to long to return them.
David B.
10/12/2022
Delmar, this is a confirmed fit for a 1990 Geo Tracker. Could it be flexed or something? Also we have a 6 month return policy. Call customer service with your order number and they can walk you through the process.
Excellent product, steel seems heavy duty enough for basket use
Excellent customer service! I'lllet you know more once the item is installed.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
1/14/2022
It sounds like your hitch receiver was flexed. This is a common issue that can be handled with a table vice or a pry bar. Here are tips for fixing this in the attached help article:
Helpful Links
faq-my-trailer-hitch-doesnt-fit.aspx