Recommended Stainless Steel Trim Kit for a Furrion 0.9 Cu Ft RV Microwave

Question

Question:

What are the inside dimensions of this product? Need to know if my microwave will fit inside of the space.

asked by: John

0

Expert Reply:

Hey John. The inside of the Greystone Trim Kit item # FR22EF measures 19" wide by 10-3/8". It's designed for Furrion 0.9 Cu Ft stainless steel microwaves. It has exterior dimensions of 23-3/8" long x 2-13/16" wide x 15" tall.

We also have this trim in black it's the Replacement Black Trim Kit item # Trim-BL-FR03.

What make and model microwave do you have and what kind of RV are you going to be installing it in?

expert reply by: Jerred H

0

Trim Kit for a Furrion 0.9 Cu Ft RV Microwave
(click to enlarge)

Answer 1

Hey Dan, thanks for the picture. You are correct the High Pointe Built-In Convection Microwave with Air Fryer item #HP56ZR in black and item #HP36ZR in stainless do have the exact same 20-1/2" wide x 12-7/8" tall x 20" deep dimensions.…

view full answer...

Answer 2

Hey Mark! You can replace your High Pointe with the Furrion Built-In RV Convection Microwave and Air Fryer #FR63TF (black) or #FR73TF (stainless) as long as you have a large enough cutout. Furrion requires a cutout that's 14-5/8" to…

view full answer...

Answer 3

Hey Carlos, the Vitrifrigo C85iX OCX2 Stainless RV Fridge #VT58FR that you referenced is close enough in dimensions to your Dometic RM2351 that it would work great as a replacement. This is electric only and Vitrifrigo is a very reliable brand of…

view full answer...

Answer 4

Hey Lee! The Furrion Built-In #FR77AD requires a cutout measuring 20-1/2" wide, 13-3/8" high, and 17-3/4" deep. Since we don't have a way of knowing how much space you have you will need to measure and see if it will fit. As long…

view full answer...

Answer 5

Hi Amos! We do have a light kit that will fit the 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches - Steel - 440 lbs #e54VV, but the brackets on the Light Mounting Kit #e98943-44LED are too large to fit between the slats on the cage if it…

view full answer...

Answer 6

Hey Laura. The top of the 24x60 etrailer Enclosed Cargo Carrier item #e54VV can not be removed. Additionally, the cage around the carrier is not rated to have things stored on top of it. The sides of the cage will not be able to support the gear in…

view full answer...

Answer 7

I couldn't find much on the P10034AP-L3-FR01 model number you provided. The closest to that number I found was the P10034AP-L3-FR02 which has measurements of 17" tall x 25" wide x 17.3" deep. The closest option we have to those…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Recommended Stainless Steel Trim Kit for a Furrion 0.9 Cu Ft RV Microwave

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching