Will the 18k Coleman-Mach Everest Work w/a Multi-Zone Setup or Does it Require it's Own Thermostat?

Question

Question:

Will the Coleman-Mach Everest work multiple zones on the same thermostat or does each one require its own?

asked by: Kenny

0

Expert Reply:

Welcome back Kenny. The Mach-C Everest Variable Speed RV Air Conditioner System item # CM55MR will not work in a multizone setup with a single thermostat. Each system requires it's own individual thermostat. This kit includes the 18k Btu Everest AC, a thermostat and an air distribution box that works in both ducted and ductless applications.

What RV are you replacing the AC on and what kind of system is currently installed? Feel free to answer this and throw in any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

CM55MR
(click to enlarge)

Kenny

8/16/2026

Thank you.

Jerred H.

8/16/2026

@Kenny You're welcome!

Answer 1

Hey Amber, for your 2005 Winnebago Sightseer 29R on the Workhorse P32 chassis we have a Timbren kit for the front axle with the part #TGMFP30W which is very similar to the SumoSprings and would work great. We do have a SumoSprings kit for the rear…

view full answer...

Answer 2

The SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-290-54 are actually jounce-style springs which do not require inflation. This particular system is rated for 2,800lbs. I really like this design because it offers a completely…

view full answer...

Answer 3

Hello Vernon, Great question. I actually reached out to Coleman-Mach to make sure. Based on what they told me, if your Keystone Alpine 3220RL was equipped with the In-Command system and factory prepped for a third AC, the Coleman-Mach Mach-C Everest…

view full answer...

Answer 4

Hey Virginia, thanks for reaching out! The part you referenced is the Solera 2000 Series and Edge RV Awning Hardware #LC65AF. Were you needing the whole hardware kit, or was there something specific you're needing?

view full answer...

Answer 5

Hey Kyle! That is correct. The Coleman-Mach Mach-C Everest has variable-speed cooling and an inverter-driven compressor. However, the Mach-C Everest uses a traditional wall thermostat instead of a remote control. It also works with both ducted and…

view full answer...

Answer 6

Hey David, you can replace your Coleman Mach 15 with the Coleman Mach Everest part #CM35MR and use the same wiring that's behind the walls. Everything else would need to be swapped out but the wiring can be reused. We only have the Everest in the…

view full answer...

Answer 7

Hey Gene! Mach-C Everest Variable Speed RV AC System #CM35MR will work with your existing furnace. This is a complete replacement so you will install the new rooftop unit, air distribution box, and wall thermostat. The new Coleman thermostat will…

view full answer...

Answer 8

Hey Edward, the Coleman Mach Everest part #CM35MR would be a really great option to replace your Coleman Mach 15 as it's very quiet, blows very cold, and also draws a lot lower amperage. Only issue is that it's not available for a couple…

view full answer...

Answer 9

Welcome back Jake! To replace your 48209-0650 Coleman Mach 15 Power Saver/Quiet, I recommend the Coleman-Mach Quiet Series Mach 15 RV Air Conditioner item #CM86GR, along with Coleman-Mach ChillGrill Air Distribution Box item #CM36RR, and the Single…

view full answer...

Answer 10

Hey Walt, I actually would recommend the Coleman Mach-C Everest RV AC unit part #CM35MR for you over the Furrion Chill Cube as the Chill Cube isn't quite working yet with the furnaces as well as we like. There are ways to use relays that we are…

view full answer...

Will the 18k Coleman-Mach Everest Work w/a Multi-Zone Setup or Does it Require it's Own Thermostat?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching