bing tracking image
Q & A Icon

Recommended Brake Controller for a 2007 holiday Rambler Endeavor  

Updated 08/03/2026 | Published 07/28/2026

Question:

Do you have a six pin 5 wire connector and brake controller for a 2007 holiday rambler endeavor?

0

Expert Reply:

Unfortunately, we do not Kerry and if you have the white plug there is not a brake controller adapter for it. Most of those didn't even have the power wire ran to them either so people routinely cut them off.

To add a brake controller to your 2007 holiday Rambler Endeavor, I recommend the Redarc Tow-Pro Liberty w/ Universal Wiring Harness item # RED52VR. This is a proportional brake controller that will slow or stop your trailer with the same amount of force you're using to slow or stop your motorhome.

The universal harness included with the Redarc Tow-Pro Liberty item # RED52VR. You'll need to locate the brake controller wire on the connector and splice it into the blue wire. The black wire will go to a 12v power source. The white is your ground wire and the red one should be wired to the cold side of your stop light switch. That's the wire that only carries voltage when you press the brake pedal.

I attached a wiring diagram so you can see how to get the Tow-Pro Liberty item # RED52VR installed.

Using a circuit tester like item # PTW2992 will be the best way to identify the wires you need.

If you don't have the white connector, you can send me a picture of it directly to the email address you receive this response from and I can see if I can identify what brand it is. If you're not the original owner someone may have already installed the wiring you'll need.

What do you plan on towing behind your motorhome?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H
RED52VR
RED52VR
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>