Kenda ST235/75R15 for a 15x5 Inch Wheel

Question

Question:

Will Kenda KE68JR ST235/75R15 fit on a 15x5inch wheel? There are two responses, one says yes and one says no...

asked by: Andrew

0

Expert Reply:

Hey Andrew,

Thanks for your question and sorry for the confusion. The Kenda ST235/75R15 Radial Off-Road Trailer Tire - Load Range D # KE68JR is not compatible with a 5-inch-wide wheel. To be mounted safely and perform as intended, this tire requires a 15-inch wheel that is 6 inches wide.

If you're planning to keep your 15" x 5" wheels, you'll need to step down to an ST205/75R15 tire, such as the Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire - Load Range D # KE93KV. This tire is an 8-ply, Load Range D radial with an M speed rating (81 mph).

Out of curiosity, are you looking to switch to an off-road style tire, or are you mainly trying to find a tire that's compatible with your existing wheels? Also, what size tires do you currently have?

expert reply by: Christopher H

0

Glenn

7/21/2026

I put mine on a 2020 Springdale 1720TH toyhualer (single ATV) which has 15x5" rims ... so far so good so but im guessing will void any warranty if i have problems with the tire ...

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Kenda ST235/75R15 for a 15x5 Inch Wheel

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching