Which MORryde X-Factor Fits Grand Design Momentum 21G
Updated 07/14/2026 | Published 07/04/2026
Question:
Is this the correct part for a grand design momentum 21g Thaler? Thanks!
asked by: Mark C
Expert Reply:
Hey Mark, yes the MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR is the correct fit for your Grand Design Momentum 21g Thaler as this was designed to fit standard hangers like what your Grand Design has.
S
7/10/2026
installed 3. front/back, middle of axles. on 35' 5th wheel, Keystone. I have a serious 10 point 180 degree turn around on gravel, at the end of each trip, which results in hard scrubbing. Had a engineer buddy come over and suggested making brackets and welding them on the I beams. This looked like it would have the same effect. Been on a year, seems to prevent the leaf spring brackets from bending as I had hoped.
Craig
7/10/2026
I installed them on a jayco 28bhs. I do notice a difference in overall stability of the trailer, but in fairness I also installed the morryde 300cre hanger kit and switched to a gen y boss hitch. So I can't say for sure which made the most difference. With that said, anything to stiffen the side to side motion of those hangers is worth it. I've torn 2 off on a previous travel trailer. Hunting down a welder to repair them and the downtime is not fun. I also like the fact they are removable as I have a fresh water tank directly above and didn't want a permanent welded beam blocking repair access if needed.
Jameson C.
7/13/2026
Jameson C.
7/13/2026
Emma C.
7/10/2026
Yes - that is the correct part. We are always happy to suggest that product as it's a huge safety upgrade for not a big price.
Jameson C.
7/13/2026
Clay S.
7/11/2026
I used the MORryde X-Factor Crossmember to beef up the ride inside the trailer (in the past we'd find pictures and accessories all over the floor from driving on our roads). I've also found the towing of the trailer has changed for the positive of not so much swaying. It works for us with our Grand Design 2600RB. I also did a change of adding the CRE3000 to the axles at the same time. The MORryde X-Factor Crossmember was pretty to install if I recall as well. I would recommend the MORryde X-Factor Crossmember. Whatever gives you the advantage of towing for a safer comfortable experience do it!
Product Page this Question was Asked From
MORryde X-Factor Crossmember for Standard Frame Hangers
- Accessories and Parts
- Trailer Suspension Parts
- Crossmember
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: dexter grease seal
- Search Results: roadmaster slipper springs
- Search Results: jack
- Q&A: Which Roadmaster Comfort Ride System is Recommended for 2025 Brinkley G3250
- Shop: Electric Trailer Brake Assembly for Lippert ABS Hubs - 12" - Left/Right Hand - 5.2K - 7K
- Shop: Grease Seal
- Search Results: grease seal 10~36
- Search Results: deutsche hydrapro brake actuator
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 6K Trailer Axles
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: DeeMaxx 90-Degree Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares
- Shop: DeeMaxx Tee Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares
- Shop: DeeMaxx Braided Stainless Steel Hydraulic Brake Line, 3/16" Male Inverted Flares, 4'7"
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Search Results: trailer hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Should I Get Loadlifter 5000 Or 7500 For Towing A 15K Fifth Wheel
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Q&A: Do I Need a Sliding 5th Wheel Hitch for a 2026 Ford F-350 w/a 6-3/4' Bed?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Q&A: How to Determine If a Spacer is Needed When Installing Timbren Springs on 2022 Ford F-350
on Accessories and Parts
David C.
7/10/2026
I added them to the center and back set of shackles on my Brinkley z3100. They removed a lot of the sway when changing direction. I am very happy woith them. They were easy to install too.