What is Max Air Pressure for Lionshead Steel Modular Trailer Wheel LH44ZR

Question

Question:

what is the max air presure on these rims

asked by: Joe

0

Expert Reply:

Hey Joe, the limiting air pressure factor for the Lionshead Steel Modular Trailer Wheel # LH44ZR that you referenced would actually be the valve stem you put in it. For example the metal valve stem part # AM20906 would be a great option that can handle over 100 psi and it fits this wheel. How much pressure you think you'll need to run?

expert reply by: Jameson C

0

Joe

6/24/2026

the tire calls for 110 cold and I have seen it go to 130 on the monitor on a day on the road

Jameson C.

6/24/2026

@Joe makes sense! Yeah the valve stem I mentioned would work with that.

Expert Reply:

Hey Joe, the limiting air pressure factor for the Lionshead Steel Modular Trailer Wheel # LH44ZR that you referenced would actually be the valve stem you put in it. For example the metal valve stem part # AM20906 would be a great option that can handle over 100 psi and it fits this wheel. How much pressure you think you'll need to run?

expert reply by: Jameson C

0

Answer 1

Hey Ryan, thanks for trusting us to be your go-to! The Torflex axles are a specialty-type axle and while we don't have exact replacements for them, we do have the 7K Timbren Axle-Less Trailer Suspension #TASR7KS01 which gives you the same kind of…

view full answer...

Answer 2

First, thanks for all that detailed information, it was very helpful. And we can get you parts for your trailer, though the issue is that there isn't an available hub for your spindle due to what you mentioned - the uncommon 501349 bearing, which…

view full answer...

Answer 3

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

view full answer...

Answer 4

The return spring inside the Bulldog Square Jacks like part #BD182800 are neither replaceable nor repairable according to Bulldog. Therefore, so you will have to replace the entire jack if yours is broken or damaged.

view full answer...

Answer 5

Without any identifying information on your trailer jack it's just a guessing game at this point. If you do end up taking your jack apart and it's rated for 10K then you just need to measure the spring to ensure the Replacement Return Spring…

view full answer...

Answer 6

Hello Danny, thanks for reaching out. That 5" Offset Ball for Hide-A-Goose Gooseneck Trailer Hitches #19308 may work for you, but I would have no way to confirm this. We do not carry the Ecotric brand. That is mainly a brand carried by the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

What is Max Air Pressure for Lionshead Steel Modular Trailer Wheel LH44ZR

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching