bing tracking image
Q & A Icon

Replacement Drum Surge Brake Actuator for a TDE Model LP7000  

Updated 06/15/2026 | Published 06/12/2026

Question:

Hello, Im trying to find a coupler for my boat trailer and having trouble with dimensions. My trailer tongue has a true 3 inside channel measurement that would accept a straight tongue, or I need a top bolt-on style that would fit the outside tongue dimension of 3.5. It is a call IV coupler with a 2 ball. Any help is appreciated. I have photos as well if thats helpful. Thank you

0

Expert Reply:

Hey Patrick. We get these questions quite a bit and it's typically a TDE Model LP7000 actuator. So, I am going to answer your question based on that. I would love to take a look at any pictures you have. You can send them directly to the email address you receive this response from.

As far as a actuator replacement goes, that's going to require some modifications of your tongue. There's no replacement actuator that's going to slide into the 3"-3-1/8" wide hollow space your actuator sits in. What you'll need to do is cut off your tongue and weld on a standard size 3" trailer tongue. I know this is not ideal but there's no other option with the lack of replacement parts.

Once you modify your tongue you can install the Dexter DX7.5L A-60 Surge Brake Actuator item # DX83FR. This is a bolt on drum brake actuator that is going to install and sit flush with a 3" wide trailer tongue. It'll be the closest comparable height and capacity setup to what you have now. It has a 2" coupler and has a 7,500 lbs capacity. To add an electric lockout you'll need the item # T4748800.

For disc brakes you'll need the Dexter item # DX89FR, which comes with the electric lockout.

What model actuator do you have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>