Are Mounting Tabs on Replacement Venture Landing Gear Leg on Inside or Outside

Question

Question:

Inside or outside ? My follow leg tabs face out and shaft point inside. What part number and need one asap Darrell

asked by: Darrell L

0

Expert Reply:

Hey Darrell, the mounting tabs on the replacement landing gear leg part # LC89AF are on both the inside and outside of the outer tube. You asked for a part number though, are you asking for a follow leg for your current landing gear? If so, what do you have?

expert reply by: Jameson C

0

Follow Leg
(click to enlarge)

Darrell L.

6/10/2026

Yes, I need a 33.5 follow leg. From my research it looks like pn LC64PJ is match for my trailer. 2016 Outdoor RV Glacier Peak 28 RKS VIN 51W573421G1010775

Jameson C.

6/10/2026

@DarrellL Yeah, the part # LC64PJ would be what you'd need.

Answer 1

Based on my research, the Replacement Gearbox #LC276602 should work perfectly for your existing Venture Landing Gear. This will replace the gearbox and is designed specifically for the Venture universal-mount landing gear assemblies. It features an…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hi Gary, that radio was discontinued and it has a pretty unique cutout size being extra long for the height. You can use something like the #JEN93YR but you will need an adapter plate or other modification to fill the additional space. The #JWM60A…

view full answer...

Answer 4

Hello Maximus, The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C22ZV is a preorder item. The hitch is still in production and has not been released yet, that is the time frame they are currently looking at before it is released…

view full answer...

Answer 5

Lippert was unable to identify exactly what you have based on part numbers, but I can still help you find the correct replacement. You will need to check and see where the landing gear is mounted and also measure the black outer tube on your existing…

view full answer...

Answer 6

We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement #LG-179014, which can be used with most landing gear…

view full answer...

Answer 7

Sounds like you are looking for a replacement fan blade and motor setup for a Fan-Tastic roof vent part number 5300. For that you'd want the part #FVK8017-00 and you'd be set.

view full answer...

Answer 8

When the 8000 lb Reese Electric 5th Wheel Landing Gear, part #RP500708 is installed, the motors are mounted on top of the legs. This means less space is needed when installing these landing gears. Should you lose power, there is a manual adjustment…

view full answer...

Answer 9

Hi Pete; we do have self-leveling sealant like the LaSalle Bristol XTRM #34427034145-1. However, Forever Lap Sealant is not a brand that we carry which is why you aren't finding it on our site. Are you repairing your roof vent?

view full answer...

Are Mounting Tabs on Replacement Venture Landing Gear Leg on Inside or Outside

Product Page this Question was Asked From

Continue Researching