Does Rack'Em Sell Just One Fitz-All Enclosed Ladder Rack Crossbar?

Question

Question:

Do you sell additional single racks for the Rack Em cargo trailer ladder racks? I really need 3 rather than 2. Also, loading rollers?

asked by: Bob M

0

Expert Reply:

Hi Bob,

I did some research RackEm doesn't offer single crossbars for their Rack'Em Fitz-All Enclosed Trailer Ladder Rack part # RA-28 system. If you want a third crossbar you would need to purchase another set of crossbars in order to get another crossbar for your set up.

For loading rollers, there isn't a dedicated load assist system for the Rack'Em ladder rack. This rack also doesn't have a T-slot channel which most load assists are designed for. The best suggestion I have is to try and create something custom using heavy-duty PVC over a steel rod or unistrut and attach it directly to your crossbar using U-bolts. This system should make it easy to slide ladders or other heavy loads up onto the crossbars.

What do you typically haul on your Rack'Em trailer ladder rack?

expert reply by: Claire H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hi Kenneth, I'd be happy to help. The first thing to verify is that your 2026 Ram 2500 is a 4WD model equipped with a transfer case that has a neutral position, since those are the configurations that are generally approved for flat towing. If…

view full answer...

Does Rack'Em Sell Just One Fitz-All Enclosed Ladder Rack Crossbar?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching