Replacement for Thetford Aqua-Magic STYLE II With Hand Sprayer

Question

Question:

Dometic 410 Bone toilet with hand sprayer. Im interested in replacing my 8yr old Thetford Aqua-Magic STYLE II toilet and hand sprayer with a Dometic. I only have 9.5 clearance from the back wall so I dont believe a Dometic 310 will fit. Does the 410 come with a hand sprayer, or can one be added?

asked by: Ron S

0

Expert Reply:

Hey Ron, welcome back! With only 9-1/2" from the wall to the center of the floor flange, the Dometic 310 and will not be a fit but the 410 # DMC64JF will be. This requires a 7-5/8" rough-in so it will fit your existing space.

Then for the hand sprayer, you can add the Hand Sprayer Installation Kit for Dometic RV Toilets # DOM75FR. This kit is compatible with the 410 and includes the sprayer, hose, mounting bracket, and installation hardware.

What trailer are you working on?

expert reply by: Robin H

0

Thetford Aqua-Magic Style II
(click to enlarge)

Ron S.

6/2/2026

Are you sure about the Dometic 410? The specs show that it only needs <8” clearance. If the 410 doesn’t come with a sprayer, can I get one added?

Robin H.

6/3/2026

@RonS you're right, 7-5/8" on the # DMC64JF I was mistaken. You can add a hand sprayer with # DOM75FR.

Answer 1

Hey Michael, welcome back! The #DMC64JF is the newer production model of the #DOM37FR and is designed to replace it. They are pretty much the same and part of the 310/Part-Timer line. The overall dimensions are slightly different at 18-1/2" long…

view full answer...

Answer 2

Hey Jon, typically people replace the Dometic 310 RV toilet with the 410 which we have with the part #DMC64JF for a tan porcelain or the part #DMC44JF for a white porcelain. These are both standard height toilets with a round bowl and a slow close…

view full answer...

Answer 3

Hey Bud, thanks for reaching out. I took a walk out to our warehouse and measured the top of the Stromberg Carlson Electric Trailer Jack #JET-3755 for you. The head of the jack is approximately 7" deep x 7-1/4" tall x 4-1/4" wide. The…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Replacement for Thetford Aqua-Magic STYLE II With Hand Sprayer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching