Replacement RV Toilet for Keystone Montana to Replace Dometic 310

Question

Question:

I need to replace my model 310 toilet for my 2012 Keystone Montana High Country. Please send me any of the model 310 replacements you carry, with prices. Thank you.

asked by: Jon A

0

Expert Reply:

Hey Jon, typically people replace the Dometic 310 RV toilet with the 410 which we have with the part # DMC64JF for a tan porcelain or the part # DMC44JF for a white porcelain. These are both standard height toilets with a round bowl and a slow close lid. How did you like the 310?

expert reply by: Jameson C

0

Toilet
(click to enlarge)

Answer 1

Hey Steve, thanks for reaching out. The Dometic 410 RV Toilet #DMC44JF may work well in your 2020 Grand Design 320G, but unfortunately I don't have a way to verify the exact bathroom layout or factory toilet dimensions for your RV. Because of…

view full answer...

Answer 2

Hey Bud, thanks for reaching out. I took a walk out to our warehouse and measured the top of the Stromberg Carlson Electric Trailer Jack #JET-3755 for you. The head of the jack is approximately 7" deep x 7-1/4" tall x 4-1/4" wide. The…

view full answer...

Answer 3

Hey Ron, welcome back! With only 9-1/2" from the wall to the center of the floor flange, the Dometic 310 and will not be a fit but the 410 #DMC64JF will be. This requires a 7-5/8" rough-in so it will fit your existing space. Then for the…

view full answer...

Answer 4

Hey Michael, welcome back! The #DMC64JF is the newer production model of the #DOM37FR and is designed to replace it. They are pretty much the same and part of the 310/Part-Timer line. The overall dimensions are slightly different at 18-1/2" long…

view full answer...

Answer 5

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 6

Hey Jeffrey, the Dometic RV toilet part #DMC44JF is designed to fit toilet applications with a 7-5/8 inch rough in measurement which is the measurement you took. Since your current setup has 10-1/4 inches this would work with space to spare. What…

view full answer...

Answer 7

Hey Keary, yes the Dometic 410 RV Toilet part #DMC44JF will replace a Dometic 310. These two toilets are very similar so they are interchangeable.

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement RV Toilet for Keystone Montana to Replace Dometic 310

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching