Curt 2 Inch Trailer Hitch Receiver for 2026 Toyota RAV4 PHEV and 2027 RAV4 PHEV Compatibility

Question

Question:

I need a hitch for a 2027 Toyota RAV4 PHEV

asked by: Jason

0

Expert Reply:

Hi Jason, there is now a hitch option available for your 2027 Toyota RAV4 PHEV.

I recommend the Curt Trailer Hitch Receiver part # C34FR62ZY. It features a 2 inch receiver opening, which gives you the most versatility for accessories and towing equipment while also providing excellent stability and capacity. This hitch is a fully bolt on installation with no drilling required, and it maintains good ground clearance on the RAV4 PHEV.

What are you planning to use the hitch for, a bike rack, cargo carrier, or something else?

expert reply by: Heather A

0

Answer 1

Hey James, we have the Curt hitch part #C34FR62ZY as a confirmed fit for your 2026 Toyota RAV4. This fits the hybrid and the PHEV versions BUT it's on a bit of a backorder and won't be available for some time. Are you planning on doing some…

view full answer...

Answer 2

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 3

Hi Mary, there is now an option for a hitch on your PHEV, For carrying a bike rack on your 2026 Toyota RAV4 PHEV, I recommend the Curt Trailer Hitch Receiver part #C34FR62ZY. It gives you a 2 inch receiver opening, which is the best option for bike…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Curt 2 Inch Trailer Hitch Receiver for 2026 Toyota RAV4 PHEV and 2027 RAV4 PHEV Compatibility

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching