Total Length of Sendel Trailer Wheel Center Cap

Question

Question:

Wht is the total length???

asked by: Joe

0

Expert Reply:

Hey Joe! The total length of the Sendel Trailer Wheel Center Cap # SEN93FR is 3-3/8". This is designed to fit a 3.19" pilot diameter.

What trailer are you working on?

expert reply by: Robin H

0

Sendel Trailer Wheel Center Cap
(click to enlarge)

Joe

6/5/2026

I have a EZ Loader tandem axle with ez lube caps, no one makes. Cap that extends past the EZ lube adapter with an end cap to hose the ez lube

Answer 1

I believe we have what you are looking for with the etrailer Spare Tire Lock #e98892. This locks the lug bolt opening and this is a 2-piece lock that threads together, as you can see in the linked installation video. This lock will work so long as…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

Hi Craig! Thanks for the pictures! ^___^ The Americana Aluminum Trailer Wheel - Split Spoke - 15" x 6" Rim - 5 on 4-1/2" #AM63FV is very very similar to the Sendel T03 wheel. To the point of not being able to tell them apart, to be…

view full answer...

Answer 11

Hey Joshua, yes the Kenda Karrier KR35 ST175/80R13 LRD part #KE34TJ would fit in place of what you have now as it's exact same tire size and wheel bolt pattern. This will be a nice upgrade in capacity as well as will look a lot nicer as well. How…

view full answer...

Answer 12

Hey Joe! The total length of the Sendel Trailer Wheel Center Cap #SEN93FR is 3-3/8". This is designed to fit a 3.19" pilot diameter. What trailer are you working on?

view full answer...

Total Length of Sendel Trailer Wheel Center Cap

Product Page this Question was Asked From

Continue Researching