Parts Needed for Redarc Brake Controller Installation on 2022 Subaru Ascent With Tow Package

Question

Question:

Hello, Just want to verify all these are going to fit together before i place the order. My vehicle is 2022 Subaru Ascent OEM Towing Package Part Number: RED44FR Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional Part Number: C48RJ Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In Part Number: 331-TPH-019 Redarc Tow-Pro Wiring Adapter for Curt Brake Controller Harness

asked by: Stefan T

0

Expert Reply:

Hey Stefan! Yes, that combination will work on your 2022 Subaru Ascent. The Curt Custom Wiring Adapter # C48RJ will fit the brake controller port on your vehicle. Then the # 331-TPH-019 will adapt the Curt wiring harness to your Redarc Tow-Pro Elite # RED44FR for a plug and play installation.

What are you towing with the Ascent?

expert reply by: Robin H

0

Tow-Pro Elite
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 8

Thanks for reaching out Larry, Yea I did a double take when i seen 5500 lol If your 2019 Ram 5500 has the factory trailer tow package, the #RED87CR is indeed the correct fit and the mating connector should be present somewhere behind the dash. The…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 11

Hey Jonathan, congrats on the new truck! The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2026 Nissan Frontier SV. It measures 1-8/16" tall x…

view full answer...

Answer 12

Hey, Stephen! We got just what you need. Since you don't have a tow package, I'm not sure if you have a hitch on your 2025 Ford Ranger so I'll include one just in case. Draw-Tite Max-Frame Trailer Hitch Receiver Part #DT35PR Curt…

view full answer...

Parts Needed for Redarc Brake Controller Installation on 2022 Subaru Ascent With Tow Package

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching