bing tracking image
Q & A Icon

Recommended MORryde Rubber Equalizers for Tandem Axle Trailers and How to Confirm It Fits  

Updated 04/26/2026 | Published 04/23/2026

Question:

Im considering purchasing the MORyde MR87ZR Equalizers and the MORyde MR46ZR suspension upgrade wet kit also. I need to replace the leaf spring also. My current leaf springs measure 25 1/4. Im unclear on whether the NORyde equalizer needs a 26 spring or If I just need to replace the springs that match my current springs.

0

Expert Reply:

Hey August, welcome back. If your current springs are 25-1/4" long you'll want to replace them with the same size leaf spring. The 25-1/4" Long 3-Leaf Double-Eye Spring item # e57SR you were looking has a 2,000 lbs capacity and is designed for 4,000 lbs axles.

As far as the MORryde Rubber Equalizers for Tandem Axle Trailers item # MR87ZR goes, you're going to want to replace your equalizers with ones that are as close as possible to the dimensions of the ones currently on your trailer.

If you look at the diagram below of the MORryde Equalizers item # MR87ZR. You'll see a 6-1/2" measurement that goes from the center of the left mounting holes to the center of the right mounting bolt holes. You'll also see a 3-1/4" measurement that goes from the top mounting hole to the center line of the left and right mounting bolts.

If you could get those measurements off of one of your equalizers and put it below where it says Add Comment, I'll be able to confirm the item # MR87ZR is the correct one of find one that is.

What kind of trailer do you have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H
MR87ZR
MR87ZR
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>