Recommended Hitch for a 2025 Chevy Equinox RS

Question

Question:

Part 76419 hitch. Can you verify that this hitch will or wont fit on a 2025 Equinox RS. In the description says Equinox buy dont list any models.

asked by: Ryan S

0

Expert Reply:

I sure can Ryan. The Draw-Tite Hitch item # 76419 does indeed fit the RS models of the 2025 Chevy Equinox. This custom fit class III hitch has a 2" receiver and will bolt directly to your Equinox with included hardware.

What do you plan on using your new hitch for? Towing a trailer or an accessory like a bike rack?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

Ryan S.

4/13/2026

Ok what's the difference from the C77fr we just want it for a bike rack. Not even going to do anything with any wiring just a bike rack

Jerred H.

4/13/2026

@RyanS Not much! The brand and the price are the only differences between the Draw-Tite item # 76419 and the Curt item # C77FR. Both fit the RS model and will work great with a bike rack.

911mickeyh

4/14/2026

The hitch is very simple to install. I changed the way the instructions said to do it. I threaded each bolt and washer assembly on the the wire pull. ran 1 assembly for the driver side front and the passenger side rear mounts. I then used a grandson to help hold in place to start the 2 bolt assemblies, don't tighten these yet. Fish the remaining assemblies through the frame and add the nuts. Then tighten all up. and your done

Jerred H.

4/16/2026

@911mickeyh Thanks for the tip!

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 7

William yes, I can confirm that the Curt T-Connector Vehicle Wiring Harness #C88RV is what you'd need for your 2025 Chevrolet Equinox. If you're needing help with anything else, feel free to drop a comment before you go!

view full answer...

Answer 8

Hello Andrew. It looks like our installers have not had the privilege of doing an install on a 2025 Chevy Equinox. I see that the wiring harnesses that we do have in stock have the 6 pin connector. It looks like Curt is aware of this issue and is in…

view full answer...

Answer 9

Hi Ashley; we do have a hitch and wiring for your 2025 Chevy Equinox. I recommend the following: -etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e59ZR -Curt T-Connector Vehicle Wiring Harness #C44FR I really…

view full answer...

Answer 10

Hello Hannah, thanks for reaching out. Between those two hitches for the 2026 Equinox EV, the Draw-Tite #DT66KV has the best ground clearance. The crosstube for the hitch sits slightly higher compared to the Curt. With the Draw-Tite hitch it will be…

view full answer...

Answer 11

I sure can Ryan. The Draw-Tite Hitch item #76419 does indeed fit the RS models of the 2025 Chevy Equinox. This custom fit class III hitch has a 2" receiver and will bolt directly to your Equinox with included hardware. What do you plan on using…

view full answer...

Answer 12

Hey Kienan thanks for the picture. The only solution I have for you is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item #C59236. This is a universal wiring harness that uses clamps instead of splicing and cutting wires.…

view full answer...

Recommended Hitch for a 2025 Chevy Equinox RS

Featured Help Information

Miscellaneous Media

Continue Researching