RAS Kit For A 2024 Nissan Titan SV

Question

Question:

Do you have a RAS kit to fit a 2024 nissan titan SV not an XD?

asked by: Michael M

0

Expert Reply:

Hi Michael!

We do indeed have a RAS kit that will fit your 2024 Nissan Titan SV. Actually a couple of them and just to make sure, I double checked with RAS and they said these options will fit if you have the XD or SV, so you are definitely good to go. I have both options listed below:

RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty # RAS3611-HD
RoadActive Suspension Custom Leaf Spring Enhancement Kit - Standard Duty # RAS3611

The heavy duty option is rated for up to 3,000 pounds of support and the standard duty one is rated up to 2,000 pounds of support. You will just need to decide which will be better for the weight you are towing/carrying.

Speaking of which, what are you going to be towing and/or carrying?

expert reply by: Lazer S

0

Richard

3/28/2026

Michael, We installed it prior to taking a 7-week long RV trip and it made a huge difference in how my F150 drove while towing the trailer. I highly recommend the product. Although I ended up having to call the manufacturer directly because it was missing the spacers that were part of the kit.

Lazer S.

3/30/2026

@Richard Did it change the unloaded ride at all? We do occasionally hear these help with cornering, but only sometimes.

Richard

3/30/2026

@LazerS, I actually like the ride better with the RAS but Natalie’s with the exception of railroad crossing can be bouncy.

Lazer S.

3/30/2026

@Richard Oh that makes sense. Thanks for getting back to me! ^___^

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hi Michael! We do indeed have a RAS kit that will fit your 2024 Nissan Titan SV. Actually a couple of them and just to make sure, I double checked with RAS and they said these options will fit if you have the XD or SV, so you are definitely good to…

view full answer...

Answer 5

I checked with Lippert and the part number you have of 1510000140 corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

view full answer...

Answer 6

The brake controller install connector on your 2019 Nissan Titan is supposed to be under the dash above the gas pedal. If you check out the install video link I attached on this page at the 3:10 mark our installer shows where to find the connector on…

view full answer...

Answer 7

Hey Douglas, whenever available I recommend going with the HD version of the Roadactive kits like the part #RAS3611-YHD that fits your 2022 Ford F-150 4WD. The extra capacity of this kit over the non-HD basically doesn't have any downside aside…

view full answer...

RAS Kit For A 2024 Nissan Titan SV

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching