PullRite Capture Plate for 13-1/2" Wide Fabex 530

Question

Question:

Good morning I am looking for a capture plate to use with a pullrite 25k sliding hitch my camper has a Fabex Inc model 530 hitch. The trailer hitch measures 13 1/2 wide and 11 3/8 front to back.

asked by: Michael P

0

Expert Reply:

Hey Michael! Sorry for the delay, I had to have this part added to our site for you. The PullRite SuperGlide Quick Connect Capture Plate for 13-1/2" Wide Fabex Pin Boxes # PUL57YR is what you need for your setup.

What kind of 5th wheel are you towing?

expert reply by: Robin H

0

Quick Connect Capture Plate
(click to enlarge)

Answer 1

The difference is indeed the measurements as the Ford puck system utilizes the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches #RP30156 and the Ram requires the Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing…

view full answer...

Answer 2

The bottom of the pin box plate has bolt holes that the included hardware of the MORryde Orbital Pin Box Wedge part #MR65TR will bolt into. So you would not need to drill any holes into the pin box.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 9

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 10

Hey Kyle! That is correct. The Coleman-Mach Mach-C Everest has variable-speed cooling and an inverter-driven compressor. However, the Mach-C Everest uses a traditional wall thermostat instead of a remote control. It also works with both ducted and…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Hey Steve, congrats on the new truck. Since your 2026 Ram 3500 has the factory puck system, you'll want the PullRite SuperGlide 5th Wheel Hitch item #PUL28RR. The PullRite SuperGlide 5th Wheel Hitch item #PUL28RR has a 24,000 lbs capacity and…

view full answer...

PullRite Capture Plate for 13-1/2" Wide Fabex 530

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching