Replacement Hub With 5 on 4-1/2 Bolt Pattern And LM67048/LM11949 Bearings
Updated 04/02/2026 | Published 03/14/2026 >
Products Featured in This Question
Question:
Hello Im looking for replacement hubs 5 x4.5 lug for my trailer. The only part numbers i am able find are the inner bearing lm67048 and seal National 204013. The outer bearing is smaller than the inner ~3/4 dia for the spindle at the outer bearing location.
asked by: Reed J
Expert Reply:
Hey Reed! It looks like you went ahead and ordered the Dexter Trailer Idler Hub Assembly # DX22XR. This uses # LM67048 inner and # LM11949 outer bearings. THe LM11949 has a .075" inner diameter so that matches up with what you described. However, the grease seal that comes with this hub has an ID of 1.688". The National 204013 has an ID of 1.50" so you will need to swap out the grease seal for # CES32QR.
What kind of trailer do you have?
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- LM67048 / LM11949
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What Hub Can I Use to Convert My Agricultural Hubs to a Standard Trailer Hub?
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Q&A: Hub For Outer Bearing LM11949 & Inner Bearing LM67048
- Q&A: Trailer Idler Hub That Has a 5 on 4-1/2 Lug Pattern and Uses LM67048 and LM11949 Bearings
- Q&A: Is There a Trailer Hub Assembly with 3/4" and 1-1/4" Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Lighting Requirements
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: How to Tell the Weight Rating of a Trailer Axle



Trevor@canada
4/2/2026
Hi Measured the size of axle and determined I needed Dexter 2500 lbs hub. The website I found this was the etrailer.com, they had and could supply it. I went to Dexter Canada with part number I had, it was in there system but they couldn’t supply it. So I bought it from etrailer.com and shipped it to a drop off point in the US. This saved me buying a new axle. The hub worked GREAT. Thank you