Recommended Hanger Replacement

Updated 03/15/2026 | Published 03/10/2026

Products Featured in This Question

Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole

(314)

$12.42

Question:

Hanger placement?

asked by: Gary K

Expert Reply:

Hey Gary. We've got quite a few spring hangers like the Front/Center/Rear Hanger for Double-Eye Springs item # 28-5. This one is 3-1/4" tall measured from where it attaches to the frame to the 9/16" bolt hole.

How tall of a spring hanger are you needing?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

28-5
(click to enlarge)

28-5
(click to enlarge)

Dan B.

3/14/2026

I added a third 6K axle to my trailer frame to build a new Mardi Gras parade float. I have my axle hangers spaced as follows: 1st hanger —- 29.5” — 2nd hanger —33” —- 3rd hanger —- 29.5” —— 4th hanger. It does depend on how long your leaf springs are though. I think my leaf springs are 26” long…it was a while back though when I did this project. Shackles I used I think ate 2.56” hole spacing with a 3.88” overall length.

Jerred H.

3/15/2026

@DanB Thanks for taking the time to leave that feedback Dan! What Mardi Gras parade do you go to? I ride on a float in the St. Louis one every year and it's always so much fun!

Daniel B.

3/15/2026

@JerredH. We ride in several parades on Mississippi Gulf Coast (Ocean Springs parades, Pascagoula, D’Iberville, and Biloxi). We have two floats. 32’ and 40’ in length. Lots of work…but lots of fun!!!

Jerred H.

3/15/2026

@DanielB Maybe I'll see you some day! The D’Iberville and Biloxi area is where I plan on posting up when I retire! Good to know they throw a big Mardi Gras parade.