E-Bike Rack Recommendation for 2016 Mazda CX-5

Question

Question:

Love this rack. However, I am purchasing an e-bike that weighs 65 lbs. Do you have similar type that would accommodate an e-bike? I do not have a hitch on my 2016 Mazda CX-5

asked by: Linda C

0

Expert Reply:

Hey Linda, because of how heavy e-bikes are there aren't any trunk mounted e-bike racks available. You would have to install a hitch on your 2016 Mazda CX-5 like the part # e98902 so that you could use an e-bike rack like Hollywood Racks Destination part # HLY66ZR.

The extra weight of an e-bike would just be too much panels of a vehicle which is why they don't make any like that.

What e-bikes are you planning on getting?

expert reply by: Jameson C

0

Linda C.

3/3/2026

Well, the bike I was planning to get was dependant on your answer here. Since I do not have a hitch and can not afford to install one I may have to opt for a foldable bike.

Jameson C.

3/3/2026

@LindaC Makes sense! Yeah everything related to e-bikes tends to cost a bit more haha.

Dave T.

3/5/2026

@LindaC, I purchased the Hollywood rack and put 2 ebikes on it. I don't recall the weight, but I am pretty sure they were around 65# and 70#, respectively. The rack is great, holding both bikes with no issue, and the ramp makes loading and unloading a breeze. I use it both on our Subaru Outback and on my GMC Sierra truck. The truck is much steeper an incline because the hitch is higher, but it's still doable with the ebike's feature of 'walking' it up the ramp. I can do it, but I usually ask someone to help me steady it when going up the ramp. Hope this helps!

Cornell

3/5/2026

@LindaC Linda, I have 2 e-bikes. Revi Cheetah - weighs 75 lbs and a Ruch City - 60 lbs. A trailer hitch is required to use my rack due to the weight. I also use an 8 ft trailer at times that also requires a trailer hitch.

Davea

3/5/2026

@LindaC, Your folding bike idea sounds very good to me. A rack needs some substance to be able to hold the weight of ebikes. I have the recommended Hollywood rack. I mount it on a 2" hitch receiver. Aside from the cost of the hitch, finessing 50 lbs of rack into a 2" hole gets more challenging every year. We use a "Hitch Rack Pro" for that. So you might end up adding another $350 or so to the original rack and trailer hitch costs. So, all this ends up adding a bunch of $ to your ebike purchase. So from an initial $ perspective a folder is a great idea. OTOH, I have folding etrikes. By the time I've folded them and grunted them into my car I've pretty much already had my daily workout ;) Seriously, setting up your loading so you do not hurt yourself leaning over to ease a folding bike behind the front seat will cost more than all the pieces above in back pain, if not medical expenses. If you get a folder, make SURE you can pull the battery before folding! Every extra pound will end up with poor leverage for your back and arms moving the folded unit in and out. Given the same wheel and frame sizes, a folder will usually weigh more. The folding mechanism has to be heavy enough to take the forces the motor puts on the system. Final comment (I promise): for several decades now I've planned based on "cost per mile enjoyed." A bike setup too heavy to load up often will almost always end up with a MUCH higher-initial-cost bike that is just too cumbersome to load very often. The Hitch Rack Pro is an example of that. Without it I really was reluctant to put the rack on and off my car. With that lift I take longer to decide how many water bottles to bring than to get the rack on. High cost: low cost per mile enjoyed. Good luck with your ebike!!

See All (5) Replies to Linda C. ∨

Mark A.

3/5/2026

The answers are correct. You will need a hitch on your vehicle. The rack is great and has a handy ramp to assist loading and unloading the bike.

Richard R.

3/5/2026

I have this hitch for 2022 Honda Ridgeline and I have 2 Ebikes of 65 and 55 lbs. Works great as first time user. Easy and solid

Paul

3/5/2026

Hey Linda, If you can afford it you should get that hitch installed. It really makes life much easier to have a hitch mounted rack. At least go to U-Haul and get an estimate.

Bill P.

3/6/2026

Linda, My wife and I were in a similar situation of needing to install a hitch and use a hitch mounted rack on our 2017 Prius V. I was hesitant because I didn't know how the hitch receiver (and weight) would work on our smaller car. About 18 months ago with hesitation I moved ahead with the installation of a hitch receiver and purchased through eTrailer the Hollywood Racks Destination E Bike Rack for 2 Electric Bikes. And I'm glad I did. We just returned from traveling from MIchigan to Arizona and back with our 62 lb ebikes on the rack. There was absolutely no problem with clearance or weight. It's a great rack. Two of our friends also have the same rack and really like it. For us it was the solution for how to transport our ebikes wherever we desire. Bill P.

Answer 1

Yes, the etrailer hitch part #e98902 is a confirmed fit for your 2013 Mazda CX-5 as it fits all models of the 2013 CX-5. The hitch is rated for towing a trailer that weighs up to 4,000 lbs. But it looks like your vehicle is only rated for towing up…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

E-Bike Rack Recommendation for 2016 Mazda CX-5

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching