Parts Needed to Add Trailer Wiring to 2023 Toyota Tundra SR

Question

Question:

I know I need C44BR HITCH receiver for my 2023 toyota tundra SR that came without the towing package but what wiring do i need for the trailer break lights

asked by: Ron V

0

Expert Reply:

Hey Ron, since your 2023 Toyota Tundra doesn't have the tow package currently you would need the 4-way kit part # C85FV for the taillight functions of the trailer wiring. Then if you needed to convert to a 7-way you'd also need the part # 37185. Does the trailer have brakes?

expert reply by: Jameson C

0

Ron V.

2/27/2026

The truck does have wiring currently just not the hitch receiver. The wiring is just plugged up to dummy plug

Jameson C.

3/2/2026

@RonV If it's a round connector you could use the Curt 7-Way part # C36GJ for a 4-way/7-way combo that would plug right into that.

Answer 1

Yes, I can and congrats on the new truck! To add a hitch to your 2024 Toyota Tundra, I recommend the Curt item #C44BR. This hitch is custom fit and bolts to your Tundra with included hardware. The Curt item #C44BR is a class IV hitch with a 2"…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Parts Needed to Add Trailer Wiring to 2023 Toyota Tundra SR

Product Page this Question was Asked From

Continue Researching