Are Washers From Replacement Ball Mount Hardware Kit for Reese Pro Round Bar Available Separately

Question

Question:

I need just the 2 black serrated washers in this kit “ Replacement Ball Mount Hardware Kit for Reese Pro Round Bar WD Hitch - Spacer and Bolt Service Kit” is that possible or do I have to buy the whole kit? Thanks.

asked by: Michael S

0

Expert Reply:

Hi Michael; the washers are only available with the complete Replacement Ball Mount Hardware Kit for Reese Pro Round Bar WD Hitch - Spacer and Bolt Service Kit # RP38KR. Reese doesn't offer them separately. It wouldn't be a bad idea to have the kit for extra parts anyway since the future of Reese is uncertain right now.

Where are you headed once you replace these on your weight distribution hitch?

expert reply by: Robin H

0

Replacement Ball Mount Hardware Kit
(click to enlarge)

Answer 1

If you have a Reese weight distribution system then we have replacement bolts and washers #58133. The bolts are not stainless steel or chrome. For that you would have to get some locally rated grade 8. If you want just the washers use #58024.

view full answer...

Answer 2

I wish we could help but that's not a Reese part number we are able to get at this time.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Frank. I can give you the dimensions of the shank on the B&W Continuum item #BW28FR but you're going to need to take the measurements on your Silverado 3500 to confirm the tailgate will open. From the hitch pin hole to the center of the…

view full answer...

Answer 10

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 11

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Are Washers From Replacement Ball Mount Hardware Kit for Reese Pro Round Bar Available Separately

Continue Researching