Looking for Reese Hardware Kit 94621F

Question

Question:

IM LOOKING FOR A REPLACEMENT REESE FASTENER KIT PART NUMBER 94621F

asked by: Kenneth

0

Expert Reply:

I wish we could help but that's not a Reese part number we are able to get at this time.

expert reply by: Jameson C

0

Kenneth W.

6/17/2025

Could you direct me as to where I might look. This is a hardware kit for a 20k goose box /reese product.

Jameson C.

6/17/2025

@KennethW Looks like it's the following hardware you could find at a local hardware store: Hex Bolt –GR8 - 5/8”-11x2.00” – QTY 8 • Conical Washer – 5/8” – QTY 8 • Flat Washer – 5/8” – QTY 8 • Hex Nut –GR8 -5/8”-11 – QTY 8

Answer 1

Appreciate you reaching out Juan! Lippert confirmed that your LCI number is a 1621 pin box. Rota-Flex 5th Wheel Pin Box #LC328330 is going to be a direct replacement and bolts right on. The Rota-Flex pin box is highly rated because it has a pivoting…

view full answer...

Answer 2

Hey Eric. Congrats on the new truck! To replace the base on a B&W Companion item #BWRVK3670 that fits the Ram puck system you'll need one of the following parts: GM Factory Puck System Compatible Sliding Base - Replacement Slider Base item…

view full answer...

Answer 3

Hey Donald, thanks for reaching out! I recommend using the MORryde Cushioned Pin Box #MR84VR over the Curt Rota-Flex #LC328330 any day because it has better cushioning technology. Back in the day when the Rota-Flex was first released it was…

view full answer...

Answer 4

Hey Tony! The Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Chevy/GMC item #BWRVB3710 only works with other B&W Companion hitch heads like item #BWRVC3006. I am not sure what 5th hitch you're referring to but there…

view full answer...

Answer 5

If you have a Reese weight distribution system then we have replacement bolts and washers #58133. The bolts are not stainless steel or chrome. For that you would have to get some locally rated grade 8. If you want just the washers use #58024.

view full answer...

Answer 6

Hi Michael; the washers are only available with the complete Replacement Ball Mount Hardware Kit for Reese Pro Round Bar WD Hitch - Spacer and Bolt Service Kit #RP38KR. Reese doesn't offer them separately. It wouldn't be a bad idea to have…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Looking for Reese Hardware Kit 94621F

Product Page this Question was Asked From

Continue Researching