What is the Measurement from Bottom of Foot to Outer Tube On Ram Jack when Retracted and Extended?
Updated 02/05/2026 | Published 02/02/2026
Question:
Says the total height from bottom of jack to top of jack is 30inch retracted. what is the distance between the bottom of the foot and the pipe coming out to extend and retract
asked by: Tim
0
Expert Reply:
Hello Tim,
On the Square Jack Follow Leg - Side Pin Drop Leg - Spring Return - 25K Lift - 24-1/2" Travel # TJD-25100 from the bottom of the foot to the bottom of the outer tube is 5" retracted and 18" extended. I attached an image as well to make sure we are both talking about the same measurement.
What application are you putting this on?
expert reply by:
Kate F
0
Measurement on Jack
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Square Jack Follow Leg - Side Pin Drop Leg - Spring Return - 25K Lift - 24-1/2" Travel
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Side-Mount Jacks
- Steel
- 10001 lbs or More
- Manual Jack
- 24-1/2 Inch Lift
- Weld-On
- 1 Jack
- etrailer
more information >
Continue Researching
- Q&A: Comparing Lippert Never-Fail Bushings to the Bronze Bushings and Wet Bolt Option for Tandem Axles
- Q&A: Bolt Recommendations for a Equalizer for 2 inch Slipper Springs
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: 12 Inch Long Equalizer For 2 Inch Slipper Springs & 8,000 lb U-Bolts For Tandem Axle Trailer
- Q&A: Connecting Rod for 25K etrailer Square Heavy Duty Jacks
- Q&A: Is the Dexter Dual Hydraulic Jack System Self Leveling?
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Entry Door Latch Options For A 1998 Featherlite Cargo Trailer
- Article: It's Fun Until It Breaks: Synthetic or Steel Winch Rope
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Gooseneck to 5th Wheel Adapters
- Article: Can You Flat Tow a 2024 Ford Ranger?
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Tell the Weight Rating of a Trailer Axle