To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This replacement Anchor Plate "A" kit includes eight anchor plates for the Yakima LandingPad 1. Anchor plates are used in conjunction with LandingPad to attach a base rack system to a standard "C" channel roof-rack track.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com, and today we're gonna take a brief look at this replacement anchor plate A kit for the Yakima LandingPad 1. Now, this replacement anchor plate A kit includes eight anchor plates for the Yakima LandingPad 1 for control towers, and this kit is also going to work with the discontinued Yakima Locking RailRider 1. Now, I have included the following item numbers for you on your screen for your reference. And as you know, these anchor plates are used in conjunction with the landing pad to attach a base rack system to a standard C channel roof rack track. Now, this kit is going to include eight threaded anchor plates for your LandingPad 1. And let me give you some overall dimensions here.
Looking at the overall length, we are sitting right at 7/8 of an inch. And looking at the width, we're sitting right at 3/4 of an inch wide. And the thickness, we're sitting right at 1/8 of an inch. So again, you're gonna get everything that you see here on the table before me, eight anchor plates. And because these anchor plates are the replacement from Yakima, you can have the confidence that they will work with your LandingPad 1 or your Locking RailRider 1.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Item is exactly what I needed and these are very difficult to find! Also, I live in Hawaii and shipping was extremely high. Etrailer.com was able to work with me to make this a reasonable purchase. It was fairly painless and shipping was fast. I was able to secure my roof rack with my tracks on top of my truck bed topper. Mahalo, etrailer!
These little washers were the missing piece to installing some second hand Yakima racks on my truck. Since getting them, I've hauled my kayaks hundreds of miles, helped numerous friends transport beds, fencing, and more.
They fit well and are holding steady. Solid product, good company, great service.
These are the rectangular washers we needed to attach a gray water hose holder to the Yakima roof rack installed on our T@B 320S Teardrop. It was a chore to find them sold like this and not part of a kit we didn't need. They were quite expensive for what they are, but there is no alternative. It took a while to get them sent to NC, but then, etrailer isn't [online vendor]. At least etrailer had them and we have them now. We are grateful. etrailer has excellent communication and they were sent out promptly. We're just a long way from the warehouse. We will certainly buy from etrailer again.
Perfect for mounting my Yakima roof rack bases on my Ford Excursion factory roof rails. Good coating that hasn’t shown any rust after going through two Wisconsin winters sitting outside the whole time.
Exactually what I was looking for, great service, and fast shipping.
Used these to put solar panel on Yakima track roof rack on my camper. Worked great. etrailer is service was quick and reliable as always.
Just what I needed. Thanks
Note, these will allow you to adapt a Yakima Y01135, Y01127 or Y01126 roof track to hold a Thule Tracker 430 with TK1 fit kit. These are much less expensive than the Thule part 853-2106 (https://www.etrailer.com/Accessories-and-Parts/Thule/853-2106.html) and provide a larger attachment area. The bolts used on the TK1 fit kit (M6) exactly fit these Yakima Anchor pads.
I wanted to install a solar panel on the roof of my truck camper using the existing Yakima rails. These A nuts worked perfectly.
I bought these anchor plates to upgrade my old Yakima Rack for use on my Trailblazer.
The original anchors are shaped like footballs & don't spread out the clamping force as well as the newer design - 2 contact points with the track verses 4. The old style was easier to install, drop them in the slot, rotate clockwise, and you're done. The new style requires popping the plastic end caps off the track and sliding the anchors in from the end. It is not hard to do on a warm day. I don't like messing with automotive plastics when it's cold, too easy to break stuff.
Exactly what needed to mount a generic set of crossbars on my 2004 Fleetwood Niagara pop up's factory installed roof rails.
Mike
6/11/2016
Still working perfectly after a year.
Have the Yakima rail system on top the Snug Top shell. The landing pads make the connection to the rack possible and also allow for a quick, a easy and secure R&R of the rack when it is not needed. The caps on the Anchor plates when the rack is removed protect the plates and have not yet lost one to wind or my own doing.
Philip
2/7/2019
after a year the landing pads are still working well and happy to report I have not yet lost the caps .I live in a high desert area with extremes of temperature and uv radiation and the plastic is holding up
Just what I needed
These parts worked perfectly.
Exactly what I needed to fix my Yakima roof rack!
High quality, excellent fit
Exactly what I needed for my landing pads. Fit my trucks bed cover slot rail perfectly.
I bought these for use with Thule's XADAPT11 kayak adapter plate, which came with 20x20mm anchor plates that wouldn't fit my Yakima Whispbar rack without cutting the rubber insert. These are slightly thinner and not as wide and can be slide over the rubber to the correct position.
My only complaint; I couldn't find these anywhere in Canada so ordered them here, only to learn they can't ship to Canada due to Thule restrictions. I had them shipped to family in Michigan who then FedEx'd them to me overnight for $70. Sure wish etrailer would be willing to make an exception for this very small accessory.
i knew i bought these anchor plates before from etrailer when i put in my yakama racks and they were the only thing that fit the side railings for accessories add on but i couldn't find the bolts that fit them until i asked this time around. now i have extras of both. they secure accessories mounts good but i had one of my accessories stolen by force they bent the railing and got away. at least the yakama bar has to a 2 sided railing so i didn't have buy new rails again. good item to have on hand when you need it. thank you etrailer for all you help.
After much research, these are the perfect size nuts to fit the Yakima Track System. I am finally able to mount my Prinsu Topper rack to the Yakima Track System on my Topper.
Thank you so much for the speedy delivery & quality part.
Brooke M.
7/2/2025
Looks awesome, BigFoot! So glad it worked exactly how you needed it to :) I can't quite tell for sure - is that an awning you have mounted in the photo?
They fit perfectly in my Thule (factory) installed tracks on my Leer camper topper.
The product was great. It would definitely work of Yakima tracks. But it didn’t fit the tracks on my smart cap.
Very helpful locating the right part. Yakima failed miserably!
Dang, I can’t remember who I talked with, but I knew what I needed, he deciphered my lame discription, and got me the exact parts I needed! Delivered in a timely manner…
I will absolutely using “eTrailer” in the future!!!
Claire H.
5/15/2026
Those small replacement parts can be tricky to find! I'm glad we found you a solution to get you back out there. If you need anything in the future, please let us know!
M6 hardware. I used these with Y26RR rails and they worked perfect. I assume they are stainless. They look stainless.
Kyle
5/31/2026
The anchor plates havent rusted yet!
I manufactured aluminum cross pieces twixt both Yakima rails (installed on Leer canopy) that I secured (2) 100W rigid solar panels that main the charge on a EcoFlow power station mounted in the bed of my pickup.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Larry Q.
12/21/2018
Great