Replacement Parts for Retrax Tonneau Cover

Question

Question:

I’m trying to figure out what model retractable tonneau cover I have. The brand is Retrax. I attached the serial number in the photo upload area. I have a 2017 Silverado z71 crew cab. Just want to order some replacement parts but don’t know the model.

asked by: Jordan V

0

Retrax S/N
(click to enlarge)

Expert Reply:

Hi Jordan, what parts are you looking for? I'll have to send that off to Retrax to identify it and might as well ask them for part numbers while I'm at it to speed things up.

expert reply by: Robin H

0

Jordan V.

1/10/2026

I need replacement hardware and side rail clamps. And a new set of keys for the cover

Robin H.

1/10/2026

@JordanV ok I went ahead and sent that off to them. For the keys you will need the number off of the lock core.

Jordan V.

1/10/2026

@RobinH R609

Robin H.

1/10/2026

@JordanV thanks, I'll see about adding the R609 key as well and let you know when I hear back from Retrax. They aren't around on the weekend so it will be Monday at the earliest.

See All (4) Replies to Jordan V. ∨

Answer 1

Hey Corey, If you are not liking the brakes you have on your trailer and want to remove them and go with idler hubs you definitely can, if your trailer is lightweight enough. I am not sure what your state laws are, or states you travel but some…

view full answer...

Answer 2

I'm so sorry to hear about your cover! Thanks so much for attaching photos of the issue. I reached out to my tech at Retrax, and he said that judging by the lack of a lock on the passenger's side, you have a Retrax XR cover. The Retrax XR…

view full answer...

Answer 3

Hey Nicole, I spoke with Retrax and was able to find your model number thanks to the serial number you provided. You have a PowertraxPRO Hard Tonneau Cover - Powered - Retractable - Aluminum - Glossy Finish- part number 50383. We no longer carry this…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Parts for Retrax Tonneau Cover

Product Page this Question was Asked From

Continue Researching