bing tracking image
Q & A Icon

How To Adapt 16K PullRite SuperGlide From ISR Above Bed Rails To A 2025 Ford F350 With Factory Pucks  

Updated 12/31/2025 | Published 12/27/2025

Question:

Hello, I’m looking for the part number or kit for my Pullrite 16K superglide hitch that would adapt to the Ford OEM pick system. We have a 2025 Ford F350 Superduty. Our current Pullrite has ISR connections so we’re hoping those could we swapped out for an adapter kit to fit the Ford. Thank you for any assistance on this request!

0

Expert Reply:

Hi Jeremy!

You can definitely adapt your 16K PullRite SuperGlide 5th Wheel Hitch for Short Bed Trucks # PUL93RR to fit your new 2025 Ford F-350. What you will need is actually what you asked this question from, the Adapter Rails for PullRite SuperGlide 5th Wheel Hitch - Ford Towing Prep Package # PUL55RR.

You will simply unbolt the "feet" you have that attach to the above bed rails and then bolt this on and you are good to go!

Are you pulling your 26 Alliance Avenue 23ML with this set up?

expert reply by:
0
Lazer S
PullRite Adapter Install Location
PullRite Adapter Install Location
(click to enlarge)
Jeremy H. profile picture

Jeremy H.

12/30/2025

Yup, we’ll be pulling the Alliance 23ML with it. As much as I love our 2001 Ford F250 with upgrades, I wasn’t comfortable with the payload margins we had. Towing capacity was a no brainer with lots of capacity available but payload was getting eaten up as we added more things to the RV and truck. One added benefit of the new F350’s 4,000-lb payload is that we can do dry camping this summer and still tow with full tanks if needed. This was not an option for us in the 01 truck. Thank you again for your help. eTrailer once again comes through for us!!

Lazer S. profile picture
Etrailer Expert

Lazer S.

12/31/2025

@JeremyH Yeah newer trucks are designed with more capacity in mind (sometimes more than is really necessary), so that makes sense. Have fun out there and let me know if there is ever anything else you need! ^___^
Rob D. profile picture

Rob D.

12/31/2025

@JeremyH We made this same switch to F350 for the same reasons. Took a couple hours and another set of hands to make this conversion. It works well. Check the castle nuts periodically after towing. I've had to tighten them 1/6 turn once or twice as the pieces "settle in". Good Luck Rob
Jeremy profile picture

Jeremy

12/31/2025

@RobD Great advice, I will check that periodically! Thanks Rob

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>