Replacement Parts for a Georgie Boy Motorhome

Question

Question:

There is a whole group of motorhome owners who apparently have no support from etrailer! I managed to buy the one class A that you have nothing for. Sad. Georgie Boy the Cinderella of motorhomes. Jeff Clark 1997 GB Pursuit 31

asked by: Jeff C

0

Expert Reply:

Hey, Jeff.

What parts are you looking for? Depending on the part the fitment may rely on the RVs chassis. If you're needing something like a replacement toilet, awning, or any interior/exterior part I'm sure we have something that will work.

Let me know what you're hunting for and we can get that Cinderella motorhome a happily ever after.

expert reply by: Gwendolyn Y

0

Gwendolyn Y.

1/19/2026

Hey Jeff, did you end up finding the parts you needed for your Georgie Boy Pursuit? Your update could make it easier for other motorhome owners trying to track down similar replacements.

Jeff C.

1/20/2026

@GwendolynY I find that working with a 29 year old motorhome is an adventure. One thing I am looking for is some of the goof ball 120v electrical outlets they put in this RV. Now, I'm sure these outlets are probably in many RV's but I would like the comfort of going to a web site and seeing my motor home listed in the dropdown to know that the parts will fit my red headed step-child. Thank you for your time, Jeff

Gwendolyn Y.

1/20/2026

@JeffC Are you referring to the inlets that are used when you're plugging into shore power? Or an outlet to be able to plug into the RV and get power to something outside?

Jeff C.

1/29/2026

@GwendolynY The outlets randomly placed around the interior of the unit to access the 120v. Hair dryer, radio, etc. can't get em at home depot.

See All (4) Replies to Gwendolyn Y. ∨

Answer 1

Hey Wayne! Everything is switching to the new R32 refrigerant which isn't backwards compatible. It also means old R410A parts are disappearing so now is a good time to make the switch. Even if this wasn't the case, we stopped recommending…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Replacement Parts for a Georgie Boy Motorhome

Product Page this Question was Asked From

Continue Researching