Trailer Hitch Receiver For 2024 Subaru Crosstrek Hybrid

Question

Question:

Will this hitch work on my 2024 Crosstrek Limited Hybrid? I don’t see “Hybrid” listed on the fit guide.

asked by: David

0

Expert Reply:

That’s a sharp eye, David - the TowSmart # TS68ZR fits 2018–2026 Crosstreks except the Hybrid models, so it won’t fit your 2024 Hybrid. The hybrid’s battery placement changes the frame structure, which is why the mounting points are different. You’ll want to go with a hitch specifically confirmed for hybrid trims to ensure safe fitment, such as the Curt Trailer Hitch Receiver 2" # C22MJ.

Are you planning to tow or just carry bikes with it?

expert reply by: Andrew N

0

Brandon

12/15/2025

Just to confirm, Will C22MJ fit a 2026 Crosstrek Limited Hybrid?

Andrew N.

12/15/2025

@Brandon Yes sir, the # C22MJ is confirmed to fit the 2026 Subaru Crosstrek Limited Hybrid. Did you order this car already or are you just planning to purchase it? Those new hybrids look nice; I looked it up and there are some nice upgrades for that 2026 model.

Brandon

12/15/2025

@AndrewN thanks for the response! I've actually had it for just over a month already. It's been excellent so far.

Andrew N.

12/15/2025

@Brandon That's awesome, enjoy! You know where to find me if you end up needing anything else.

Answer 1

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Answer 2

Hey Brent! Thanks for reaching out! I took a look at the online owner's manual for your 2025 Subaru Crosstrek Limited and on page 412 it specifies that the max allowable tongue weight is 400 lbs (when towing a trailer with brakes). Subaru…

view full answer...

Answer 3

Hey Craig! The only option for trailer wiring on your 2026 Subaru Crosstrek Hybrid is the Curt #C59496. This is a universal splice-in harness. The only plug and play is for non-hybrid models, and we don't know if or when a custom wiring harness…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Jerit, congrats on the new car. We've got a couple of hitches that fit the 2026 Subaru Crosstrek Wilderness. The etrailer Trailer Hitch item #e98912 is going to be the most affordable option. This custom fit class III hitch has a 2"…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 11

Hello Rose, thanks for writing in. Yes, the Curt Trailer Hitch Receiver #C22MJ is exactly the right hitch for the 2026 Subaru Crosstrek Hybrid. The only exception is the wilderness model so as long as yours isn't the wilderness you can be sure it…

view full answer...

Answer 12

Hey Sue! It looks like your 2026 Subaru Crosstrek Premium has the same frame and mounting holes as the US model so you can use an aftermarket hitch. I recommend our own etrailer Trailer Hitch Receiver #e98912 which fits gas and hybrid models. This is…

view full answer...

Trailer Hitch Receiver For 2024 Subaru Crosstrek Hybrid

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching