Gen-Y Cushioned Pin Box Recommendation for 2022 Alliance Paradigm 295MK

Question

Question:

I am looking for a Jen Y hitch that fits a 2022 alliance paradigm model 295MK.

asked by: Kasey W

0

Expert Reply:

Hey Kasey, since we know your 2022 Alliance Paradigm model 295MK has the Rhino style pin box the correct Gen-Y cushioned pin box would be the part # GY33GR. What fifth wheel hitch do you have and are you trying to reduce chucking?

expert reply by: Jameson C

0

Kasey W.

11/13/2025

Sir, i purchased product BWRVK3670 from you guys in 2024. I am looking to gain more space in the back of my bed. i do have a 2019 ram 3500 crew short bed with a ball in it. Would I need an offset as well?

Jameson C.

11/13/2025

@KaseyW Makes sense! I would definitely recommend getting an offset ball too like with the part # GY83XR to help with turning clearance. The extra 5 inches this provides will make a big difference. Or, if you have a standard ball now you could try and see what type of clearance you have and then see if you need the additional offset.

Answer 1

Thanks for the picture and information Charles! The Gen-Y Hitch Nomad item #GY37ND and item #GY72SB will indeed replace the factory Rhino pin box on your Grand Design. The difference between the Gen-Y Hitch Nomad item #GY37ND and the Gen-Y Hitch…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hello Femi, Thanks for reaching out! Both the Demco Autoslide #DM39SV and #DM29GV are excellent choices for your 2026 GMC Sierra 3500 with the factory prep package, and both are compatible with your Grand Design Reflection 150 Series. The biggest…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Gen-Y Cushioned Pin Box Recommendation for 2022 Alliance Paradigm 295MK

Continue Researching