Tow Mirror Recommendation for 2020 Ford Ranger

Question

Question:

Why dont you have replacement towing mirrors for the ranger that extends?

asked by: John D

0

Expert Reply:

Hey John, while we don't have custom fit tow mirrors that fit your 2020 Ford Ranger we do have universal style slip on mirrors that would work great like with the K-Source part # KS3891-2. I attached a picture of what these mirrors look like installed on a 2020 Ranger just like yours as well as an install video for these down below.

expert reply by: Jameson C

0

Ranger Tow Mirrors
(click to enlarge)

John D.

10/29/2025

Yea, I've tried many of these and had them fall off when hitting a big bump on the interstate when going 60- 65 mph. John Davis

Jameson C.

10/29/2025

@JohnD That is a very valid concern with this type of tow mirror for sure. I am not sure which mirrors you have tried but we have sold a ton of these specific mirrors and we haven't had any reported issues with them falling off. We even had several reviews where people had the same concern come back a year later and say they never did end up falling off.

Shelley

1/4/2026

That didn't answer the question. We want to know why the nice, stable mirror extensions aren't available for Ford Rangers. Will they be available in the future? The other style vibrates in the wind.

Jameson C.

1/4/2026

@Shelley Our manufacturers just haven't made one yet. I would assume it's because the truck is not a full size truck and that's generally what they offer fits for.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 6

Hey, Stephen! We got just what you need. Since you don't have a tow package, I'm not sure if you have a hitch on your 2025 Ford Ranger so I'll include one just in case. Draw-Tite Max-Frame Trailer Hitch Receiver Part #DT35PR Curt…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 8

Hi Brian, To flat tow your 2026 Ford Ranger XLT with your Blue Ox Avail Tow Bar, you'll need: - Blue Ox Base Plate Kit w/Removable Arms part #BLU77ER, this will require some minor drilling, and the tow hooks must be removed and remain off the…

view full answer...

Answer 9

I sure can Scott! I verified with Roadmaster that their Direct-Connect Base Plate Kit item #RM23DQ does fit the 2026 Ford Ranger Raptor. It can indeed be flat towed and there are no other restrictions. This baseplate kit comes with all hardware…

view full answer...

Answer 10

Using the cut off wiring harness you have for the P3 part #90195 you will wire it to the brake controller wiring of your 2023 Ford Ranger which is sticking out of the large wire harness that goes through the driver's side firewall, left of the…

view full answer...

Answer 11

Hey David, the Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR that you referenced will fit any vehicle that has a 7-way installed on it including your 2017 Ram 3500 that has a factory brake controller. This will bypass that circuit on your…

view full answer...

Answer 12

Hello Fred, thanks for reaching out. We do have brake controllers that can be used on your 2025 Ford Ranger, but I am sorry to say we do not have anything with a custom pigtail for the factory under dash EBC plug. All of the options we have at this…

view full answer...

Tow Mirror Recommendation for 2020 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching