Torque Spec For Grade 8 Bolts On Lippert 6-Point Leveling System
Updated 11/14/2025 | Published 10/23/2025
Question:
I have a 2024 cedar creek experience 2925RL with Lippert level up 6 point jack system. One of the washers on the grade 8 bolts on one of the front jacks is split. I need a new one of those and also need to know correct torque rating. All I can find is 107 ft lbs and that seems like too much hince the split washer. Can you help?
asked by: Matt J
Expert Reply:
Hello Matt, thanks for reaching out. The broken washer was on one of the bolts going to the frame rail, correct? If so, I can tell you the torque spec for those is 75 ft-lbs. I am sorry to say we do not offer a replacement washer for this though. I would imagine you could find one at a local hardware store.
I have provided a link to the instructions for the Lippert 6-point system for your reference.
Let me know if there is anything else I can do to help.
(click to enlarge)
Product Page this Question was Asked From
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Bluetooth Control - 6-Point Set
- Camper Jacks
- 5th Wheel Camper
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 36 Inch Lift
- Bolt-On
- 6 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Q&A: How Much Room on RV Frame Does Lippert Ground Control Middle and Rear Jacks Take Up
- Q&A: Will The Lippert Ground Control 3.0 Leveling System Stabilize A Trailer Better Than Scissor Jacks
- Q&A: Middle Jack Isn't Working on a Lippert 3.0 LC675817
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Leveling System Compatible with 42 Foot 5th Wheel Trailer
- Q&A: Which Reese Goose Box Fits in Place of Lippert 1116 Pin Box
- Q&A: Dimensions of Reese RP94716-61301 Goose Box 5th Wheel to Goosneck Hitch Adapter
- Q&A: Recommended Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box for an 1116 Bolt Pattern
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: How to Dump Black and Gray RV Waste Tanks
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
Jesse M.
11/13/2025
Hey Matt, did the 75 ft-lb torque spec work better for your Lippert 6-point jack system? Your update could make it easier for others trying to avoid the same washer issue.