Do Retrax Tonneau Cover Clamps RTX34FR Work on 2023 Toyota Tundra with Bed Rail System

Question

Question:

I need to know if these clamps are compatible with the newer Toyota Tundra bed rail systems. 2023 and newer

asked by: Wes

0

Expert Reply:

Hey Wes, yes the replacement clamps part # RTX34FR are the correct clamps for a Retrax tonneau cover for a 2023 Toyota Tundra that has the bed rail system.

expert reply by: Jameson C

0

Wes

10/15/2025

It does not fit the track system.

Jameson C.

10/15/2025

@Wes Have you tried them and it didn't work?

Wesley L.

10/15/2025

@JamesonC I just did and unfortunately have to send the parts back in.

Jameson C.

10/15/2025

@WesleyL Sorry about that. We have the part # RTX65QR as our other option for Retrax clamps that does fit trucks that have the utili tracks.

Answer 1

Yes, the Retrax Replacement Clamps #RTX34FR will work on your RetraxPRO cover that does not have the stake pocket cutouts. I confirmed their fit on your Ram with 6-1/2-foot bed with my contact at Retrax.

view full answer...

Answer 2

Since you have a RetraxPro tonneau cover the correct replacement lock assembly you need is the part #RTF05-1014 and you'd be set. You'll need to enter the serial number you provided on the product page for the lock assembly.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Do Retrax Tonneau Cover Clamps RTX34FR Work on 2023 Toyota Tundra with Bed Rail System

Product Page this Question was Asked From

Continue Researching