Will The MORryde X-Factor MR33WR Fit A 2019 DRV Fullhouse JX450 Toy Hauler With 8K Dexter Axles?

Updated 10/15/2025 | Published 10/09/2025

Question:

Hello I have a 2019 DRV Fullhouse JX450 toyhauler. It has 3 8k dexter axles with ez-flex equalizers. First off is this X-Factor compatible with 8k dexter setups? Second, the attached photos are the front, middle and rear hangers from the outside. At a quick glance it looks as if the X- Factor brackets wouldnt fit on the ends. It appears that they would fit only in the middle with the equilizers. If this is correct, on my setup, only 2 X- Factors would work? Will that put more stress on the front and rear hangers? Thanks

asked by: David

2019 DRV Fullhouse JX450 Hanger
(click to enlarge)

Expert Reply:

Hi David!

Looking at your pictures, I don't think there will be any issues with the MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR fitting the middle hangers on your DRV Fullhouse JX450 toy hauler. However, I do recommend measuring you hangers as you must have a minimum height of 3.25" from the top of the hanger to the center of the mounting hole. Anything lower than that will not have enough room for it to fit properly. It looks like you have enough space, but definitely double check.

If you do have enough space, check the picture I have attached. You can see very similar hangers with the X-factor installed. With that said, with how your front and rear hangers are designed, you will only be able to install this on the middle hangers.

As to your 8k Dexter axles, that will pose no issues. We have had a bunch of people use these with 8k axles and they worked perfectly fine. As long as there is the room, you are good to go.

Are you wanting this just for peace of mind?

expert reply by: Lazer S

MORryde X-Factor MR33WR Installed
(click to enlarge)

David

10/10/2025

Yes, pretty much peace of mind and maybe a tad bit more stability especially when turning. It's pretty hard to have a 46+ foot 24k Toy hauler and not have to make some tight turns once in a while. I know that the turns can really loads the stress on the hangers. In my opinion it looks like for the cost of these that would be a great addition and peace of mind. Thanks for your response, David

Lazer S.

10/15/2025

@David Makes sense. These really do help the hangers in harder turns, which will in turn help with peace of mind. Gotta love double whammies. The good ones anyway. : P Let me know if there is anything else I can help with!