MORryde X-Factor Crossmember for Standard Frame Hangers Feature Review Video

The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you'll need three for full support on a…

Yes, we do we just have it under a different part number. It is the MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR. This is the crossmember that works with the CRE 3000 equalizer.

Thank you for the images. The MORryde Rubber Equalizers #MR87ZR are the correct set for your 2020 Keystone Outback Ultra-Lite 291UBH. You will pair this with the MORryde Suspension Upgrade Kit #MR46ZR. Instead of using the wet bolts included with the…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

The MORryde X-Factor Crossmember part #MR33WR is designed for standard suspension so that is the one you will need to use. If your leaf spring hanger brackets are wider than 3" then you will need to drill per the instructions which I have…

Hey John, To determine the correct replacement leaf springs for your trailer you'll want to jack up one side to take the pressure off the leaf springs and then can measure from the center of one eyelet to the center of the other eyelet. From…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

I spoke with MORryde and they said that the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR will work just fine with your frame hangers with gussets. You'll just need to use the circled items attached in the image below and…

Thank you for that information with the photo, and I reached out to Lippert to find the pin box you have, and they told me that you had a Lippert 1621HD pin box. We do have the MORryde cushioned pin box that will work as a replacement with the…

The MORryde Cushioned 5th Wheel Pin Box #MR84VR you were looking at has a total height of 11.35" (pictured below) so you wouldn't see much of a difference from the standard pin box you currently have. Based on what you've stated and the…

The MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR includes one adjustable crossmember. Your existing hardware will be too short due to the extra thickness of the crossmember, so you will need to add #MR58ZR if…

Thanks for the pictures! Since your 2022 Grand Design Reflection 303RLS came with the CRE3000 equalizers you will need three of the MORryde X-Factor Crossmember item #MR33WR. It looks like you have the standard 3" wide frame hanger so all of the…