Will Timbrens Work on a 2021 Chevrolet Silverado 1500 Trail Boss?

Question

Question:

Hi there, I have had good luck with Timbren in the past and am considering the SES system for my ‘21 Chevy 1500 Trail Boss because at times I pull a travel trailer. My question is about the ride without any load. I t has a nice ride now and I don’t want it to be stiff. I never liked it with the airbags without a load, even when I deflated them to 10psi. Thanks.

asked by: Kris

0

Expert Reply:

Hey Kris. The Timbren Suspension Enhancement System item # T28MR is not compatible with the Trail Boss models of the 2021 Chevrolet Silverado 1500 so you'll need to go another direction. None of the suspension systems that replace or mount where the factory bump stops are work for that model.

Instead, I recommend the RoadActive Suspension item # RAS54FR will fit your 2021 Chevy Silverado 1500 Trail Boss. It works to increase stability, handling, and control by improving traction and reducing sway. This system works while towing, carrying a heavy load in the bed, or completely unloaded. They install directly over your leaf springs and like air bags can be adjusted to your comfort level.

What kind of trailer are you pulling?

expert reply by: Jerred H

0

RAS
(click to enlarge)

Kris

10/10/2025

Thanks, Jerred - I’m just hoping it doesn’t stiffen the ride when I’m without a load. I am towing a 30’ travel trailer - around 6000 pounds with tongue weight less than 800. Kris

Jerred H.

10/11/2025

@Kris You're welcome! The RoadActive Suspension item # RAS54FR is adjustable for comfort with or without a load on your Silverado's rear end. It's the best option for a towing a trailer with a truck that comes with an off-road suspension package.

Kris M.

10/24/2025

@JerredH Thanks so much for your replies. One more question - a friend with the same truck as me got the Torift Stable Load. What are your thoughts on that system compared to the Road Active System? Thanks again, Kris

Jerred H.

10/27/2025

@KrisM You're welcome! The TorkLift StableLoad item # TLA7310S allows the overload springs of your suspension to engage sooner to gain additional support whereas the RoadActive Suspension kit # RAS54FR basically adds an additional leaf spring to the setup. They both provide additional support so in a way they perform the same function but they do it in a different way. The item # RAS54FR can have additional support adjusted in as needed so I think it would be your best option. The TorkLift StableLoad item # TLA7310S is either engaged or off. It also has additional restrictions on your Silverado. You have to have a lower overload spring. It does not fit Regular Cab models and it may interfere with the dual exhaust if your truck has it.

See All (5) Replies to Kris ∨

Answer 1

Hey James, congrats on the new truck. The Timbren's need quite a bit of tongue weight on them to be helpful when towing, so what you're running into isn't too surprising. The only SumoSprings I have for a 2025 Silverado 1500 are item…

view full answer...

Answer 2

To remove the existing bumpstop, you'll need a 10mm socket and a 6 inch extension. I've linked to an install video that you might find helpful.

view full answer...

Answer 3

We have the Karrier part #AM32459 which would work great as a spare for your boat trailer as it's the right size tire and wheel bolt pattern.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

When the SumoSprings Solo Custom Helper Springs item #SS65FR are installed on your 2020 GMC Sierra 1500 you will have a 1/2" - 1" of clearance with no additional cargo weight. This allows for you to have a comfortable ride when you are…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Will Timbrens Work on a 2021 Chevrolet Silverado 1500 Trail Boss?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching