Spare Wheel and Tire for Venture Boat Trailer with Tire Size ST225/75R15 and 5 Lug Bolt Pattern

Question

Question:

Looking for a wheel to fit a Venture Boat Trailer The tire is ST225 75R X 15 The trailer is a 5 bolt hub 4.5 inches

asked by: William

0

Expert Reply:

We have the Karrier part # AM32459 which would work great as a spare for your boat trailer as it's the right size tire and wheel bolt pattern.

expert reply by: Jameson C

0

William

11/26/2020

Looking for a wheel to fit a Venture Boat Trailer The tire is ST225 75R X 15 The trailer is a 5 bolt hub 4.5 inches

Jameson C.

11/26/2020

We do have just the wheel with part # AM20422.

Answer 1

Hey James, congrats on the new truck. The Timbren's need quite a bit of tongue weight on them to be helpful when towing, so what you're running into isn't too surprising. The only SumoSprings I have for a 2025 Silverado 1500 are item…

view full answer...

Answer 2

To remove the existing bumpstop, you'll need a 10mm socket and a 6 inch extension. I've linked to an install video that you might find helpful.

view full answer...

Answer 3

Hey Kris. The Timbren Suspension Enhancement System item #T28MR is not compatible with the Trail Boss models of the 2021 Chevrolet Silverado 1500 so you'll need to go another direction. None of the suspension systems that replace or mount where…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Spare Wheel and Tire for Venture Boat Trailer with Tire Size ST225/75R15 and 5 Lug Bolt Pattern

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching