Replacement Equalizers and Suspension for a 2013 Sunnybrook Raven

Updated 09/29/2025 | Published 09/28/2025

Question:

I want to upgrade my camper suspension. I have a 2013 Sunnybrook Raven. What version of the CRE3000 and shackle bolts do I need?

asked by: Rick B

Expert Reply:

Hey Rick. There's no database that shows what parts are on your 2013 Sunnybrook Raven. So in order to recommend the correct CRE3000 and shackle bolt kit, I am going to need you to take some measurements for me.

The shackle kit ones pretty simple I only need to know the center to center spacing between the bolt holes.

For the equalizer I need the left to right bolt hole measurement from the center of the holes and the top hole down to the center line of the first measurement.

You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

Rick B.

9/29/2025

The shackles are 2.5" The equalizer is 5" bolt to bolt and 2.5" top to centerline. The old equalizer was a Aqua-Flex Trailer, LCI P/N 1583771

Jerred H.

9/29/2025

@RickB Thanks for the additional information. The MORryde Rubber Equalizers for Tandem Axle Trailers item # MR87ZR and the MORryde Suspension Upgrade Kit for Tandem Axle Trailers item # MR46ZR are going to be the best way to add a CRE3000 setup to your trailer. The equalizer is an inch longer but the shackle straps are 1/4" shorter each so the difference in size is going to equal out. The height difference may raise your trailer height slightly but with the added range of motion it won't be much. 1/8" -1/4" if that.