Replacement Hub for Big Max Utility Trailer
Updated 09/29/2025 | Published 09/08/2025
Products Featured in This Question
Question:
Good evening, I am looking for a hub assembly set for my Big Max 5x8 utility trailer. The tire size is 5.30-12 and there is number on the back of hub which reads 8-258. Does any of this help determine which hub assembly I would need? Thank you!
asked by: Bryce O
Expert Reply:
Hi Bryce; that information narrows it down but there are still two possible hub replacements with different bearings. The # 8-258-5UC1-EZ has # L44649 inner and outer bearings with a 5 on 4-1/2 bolt pattern. The # 8-258BTUC1 has # L44643 inner and outer bearings with a 5 on 4-1/2 bolt pattern. You will need to either pull your hubs and check your bearings to see what you have, or use the serial number off the axle tag to identify it. If you have a 4 on 4 bolt patter you can use # 8-91-05UC1-EZ for # L44649 bearings or # AKIHUB-440-2-1K
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Standard Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Search Results: trailer axles
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles - 20-3/8" Long - Dacromet
- Shop: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Shop: 5-Leaf Slipper Spring w/ Radius End for 10,000-lb Trailer Axles - 30-1/2" Long
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: trailer wiring
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: trailer jack
- Shop: Brake Controller
- Search Results: trailer lights
- Search Results: trailer leaf springs
- Q&A: Replacement Trailer Hub Recommendation for Dexter 8-258
- Q&A: Will Air Lift LoadLifter 5000 Air Helper Springs AL38FF Fit 2022 Ford Bronco With Sasquatch Package?
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Hub for a UFP H1062-3
- Q&A: Replacement for Dexter 8-258 Trailer Hubs
- Q&A: How to Identify Needed Replacement Hubs for Adams Manufacturing Drift Boat Trailer
- Q&A: Grease Used In Dexter Trailer Idler Hub Assembly
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Robin H.
9/29/2025
Hi Bryce, did you have a chance to check your bearings or the serial number on the axle tag to figure out which hub assembly you need? I'm following up to ensure you find the right solution for your trailer.