What Coil SumoSprings Custom Helper Springs are the Right Fit for My 2024 Jeep Gladiator Sport S Max

Question

Question:

I have a 2024 Jeep Gladiator Sport S Max Tow and you sent me the CSS-1195 that is confirmed to fit, but I also see that the CSS-1168 is confirmed to fit, so which one fits???

asked by: Trent M

0

Expert Reply:

Hello Trent,

For your 2024 Jeep Gladiator Sport S Max Tow, the CSS-1195 Coil SumoSprings are the right choice because they’re specifically designed to match the spacing and geometry of your Gladiator’s coil springs. The key detail is the inner wall height, at 1.95 inches, the # CSS-1195R perfectly fits into the coils on your suspension, giving you the extra support and stability they’re meant to provide. The # CSS-1168, on the other hand, has a smaller 1.68-inch profile and is intended for a totally different set of vehicles.

The coils are somewhat fitguided, the best way to confirm fitment is to measure between the coils. Do you mind measuring your coils, so I can triple confirm the fitment? I attached a picture where to measure.

expert reply by: Kate F

0

Where to Measure You Coil
(click to enlarge)

Trent M.

9/8/2025

Thanks!

Kate F.

9/8/2025

@TrentM My pleasure Trent =)

Answer 1

The #CSS-1168R and #CSS-1195F are only confirmed to fit the FWD models but that doesn't mean there aren't Coil SumoSprings for your 2023 Sienna AWD. To find the right size you will need to measure the gap between in the middle of the coil.…

view full answer...

Answer 2

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hello William, Thanks for writing in, you are correct the Firestone #F4155 is not a good fit for the 2021 to 2024 Sienna Hybrid. The hybrid models have some key differences in the rear suspension area due to battery placement and tighter coil spring…

view full answer...

Answer 7

Hey Ben! The Curt does have that restriction on the vertical bike racks so I recommend the TowSmart Trailer Hitch #TS82VR. This has a higher tongue weight capacity and will allow you to carry the VelociRAX. It would be a good idea to add the etrailer…

view full answer...

Answer 8

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Answer 9

Hi Thomas; the Coil SumoSprings are pretty universal so they may fit. They're only listed for 2WD because SuperSprings never tested them on AWD models. The fact that the Timbren is listed as a fit for both does imply they will likely work, but I…

view full answer...

Answer 10

Hey Mike, welcome back! Both the Firestone Ride-Rite #F2613 rated for 5,000 lbs, and the Firestone Ride-Rite Red Label #F2709 rated for 7,500 lbs will keep you at factory ride height when you aren't towing. All you need to do is run the air bags…

view full answer...

Answer 11

The best hitch for a 2024 Toyota Sienna is the Curt item #C22UR. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum…

view full answer...

Answer 12

Hey Brandon! We don't have it listed on the pages, and I don't think any Q&A's cover all of the hitches available right now. The best ground clearance is between the Draw-Tite #DT55MR and the TowSmart #TS82VR. The distance from the…

view full answer...

What Coil SumoSprings Custom Helper Springs are the Right Fit for My 2024 Jeep Gladiator Sport S Max

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching